MTD 3000, 3100 warranty Adjusting the Cutting Height, Attaching the GrassCatcherModel

Adjusting the Cutting Height

The cutting height can be adjusted to between approximately 3/4-inch and 21/2-inches.

Move the right-hand height adjustment lever outward and then position it forward (to lower the cutting height) or rearward (to raise the cutting height) before releasing it into the notch for your desired height. See Fig. 3-4.

Attaching the GrassCatcher(Model 3100)

I.Expand the grass catcher from its collapsed position by opening up the hinges found on the inside of its frame.

2.Position the grass catcher hooks over the rod on the rear of the mower. See Fig. 3-5.

f

\

Figure 3-5

Figure

3-4

3.

Position

the

strapthrough

the grass catcher's handleand over

the mower's lower handle crossbar to support the rear

2.

RepeatStep I on the

left-hand

side making sureto

release the

of the

grass

catcher.

See Fig. 3-6.

Adjust

the length

of the

height adjustment

lever into

the corresponding

notch.

strap

so that

the bag

is low to the

ground

but not

dragging

on the

ground.

Figure 3-6

6 I SECTION3 --ASSEMBLY& SET-UP