SECTION 7: TROUBLESHOOTING

Problem

 

Cause

 

Remedy

 

 

 

 

 

Engine fails to start

1.

Blade control handle disengaged.

1.

Engage blade control handle.

 

2.

Spark plug wire disconnected.

2.

Connect wire to spark plug.

 

3.

Fuel tank empty or stale fuel.

3.

Fill tank with clean, fresh gasoline.

 

4.

Blocked fuel line.

4.

Clean fuel line.

 

5.

Faulty spark plug.

5.

Clean, adjust gap, or replace.

 

6.

Engine flooded

6.

Wait a few minutes to restart, but do not

 

 

 

 

prime.

Engine runs erratic

1.

Spark plug wire loose.

1.

Connect and tighten spark plug wire.

 

2.

Blocked fuel line or stale fuel.

2.

Clean fuel line; fill tank with clean, fresh

 

 

 

 

gasoline

 

3.

Vent in gas plugged.

3.

Clear vent.

 

4.

Water or dirt in fuel system.

4.

Drain fuel tank. Refill with fresh fuel.

 

5.

Dirty air cleaner.

5.

Refer to engine manual.

 

6.

Carburetor out of adjustment.

6.

Refer to engine manual.

Engine overheats

1.

Engine oil level low.

1.

Fill crankcase with proper oil.

 

2.

Air flow restricted.

2.

Remove blower housing and clean.

 

3.

Carburetor not adjusted properly.

3.

Refer to engine manual.

Occasional skip (hesitates)

1.

Spark plug gap too close.

1.

Adjust gap to.030”. Refer to engine

at high speed

 

 

 

manual.

Idles poorly

1.

Spark plug fouled, faulty or gap too

1.

Reset gap to.030” or replace spark

 

 

wide.

 

plug. Refer to engine manual.

 

2.

Carburetor improperly adjusted.

2.

Refer to engine manual.

 

3.

Dirty air cleaner.

3.

Refer to engine manual.

Excessive vibration

1.

Cutting blade loose or unbalanced.

1.

Tighten blade and adapter. Balance

 

 

 

 

blade.

 

2.

Bent cutting blade.

2.

Replace blade.

Uneven cut

1.

Wheels not positioned correctly.

1.

Place all four wheels in same height

 

 

 

 

position.

 

2.

Dull blade.

2.

Sharpen or replace blade.

NOTE: For repairs beyond the minor adjustments listed above, contact an authorized service dealer.

14

Page 14
Image 14
MTD 50 manual Troubleshooting, Problem Cause Remedy

50 specifications

The MTD 50 is a versatile and robust garden tractor designed primarily for residential use, catering to homeowners who require efficient lawn maintenance. This tractor combines power and ease of use, making it an ideal choice for gardening enthusiasts and landscaping professionals alike.

One of the standout features of the MTD 50 is its powerful engine. Equipped with a reliable 20 HP V-twin engine, it provides the necessary torque for tough mowing tasks while ensuring smooth operation. The engine is designed for fuel efficiency, allowing users to cover large areas without frequent refueling.

The MTD 50 showcases an innovative cutting deck system. With a 50-inch cutting width, it can handle expansive lawns and reduce mowing time significantly. The deck also features three high-performance blades that deliver a clean and even cut. The adjustable cutting height allows users to customize their lawn length, suitable for different seasons and grass types.

In terms of maneuverability, the MTD 50 boasts a tight turning radius, enhancing its ability to navigate around obstacles such as trees and flower beds. This design ensures that users can achieve a pristine finish without the need for extensive trimming afterward.

Comfort is paramount with the MTD 50. The tractor is equipped with an ergonomic seat designed for extended hours of use, complete with armrests to reduce fatigue. The user-friendly dashboard displays important information such as fuel levels and engine performance, allowing users to monitor their tractor's status effortlessly.

Additionally, the MTD 50 incorporates advanced technologies like the hydrostatic transmission, providing seamless speed adjustments without the need for gear shifting. This feature enhances the driving experience, allowing for better control and responsiveness while mowing.

Durability is another key characteristic of the MTD 50. Constructed with high-quality materials and featuring a sturdy frame, it is built to withstand the rigors of outdoor use. Regular maintenance is simplified with easy access points to critical components, ensuring longevity and reliability over the years.

In summary, the MTD 50 is a powerful and efficient garden tractor that stands out due to its robust engine, advanced cutting deck, comfortable design, and user-friendly features. These elements make it a perfect choice for homeowners looking to maintain their lawns with ease and efficiency.