Maintenance

WARNING

Always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine.

If unit is tipped for easier access to blade or belt, tip mower as specified in separate engine manual. If it does not specify turn mower on its side making sure that the air filter and the carburetor are up.

Cutting grass in sandy soil condition causes abrasive wear to the blade.

Figure 11

Lubrication

1.Lubricate the pivot points on the blade control handle at least once a season with light oil. The blade control must operate freely in both directions. See Figure 11.

2.If your mower is equipped with ball bearing wheels, lubricate at least once a season with a light oil, all other types require no lubrication. However, if the wheels are removed for any reason, lubricate the surface of the axle bolt and the inner surface of the wheel with light automotive oil.

3.Lubricate the torsion spring and pivot point periodi- cally with light oil to prevent rust. See Figure 11.

4.The transmission is pre-lubricated and sealed at the factory and does not require lubrication.

5.Follow the accompanying engine manual for lubrica- tion schedule and instruction.

Engine

1.Refer to the separate engine manual for engine maintenance instructions.

2.Maintain engine oil as instructed in the separate engine manual packed with your unit. Read and follow instructions carefully.

3.Under normal conditions service air cleaner as in- structed in the separate engine manual packed with your unit. Clean every few hours under extremely dusty conditions. Poor engine performance and flooding usually indicates that the air cleaner should be serviced.

4.The spark plug should be cleaned and the gap reset once a season. Spark plug replacement is recommended at the start of each mowing season; check engine manual for correct plug type and gap specifications.

NOTE: This spark ignition system meets all require- ments of the Canadian Interference-Causing Equipment Regulations.

5.Clean the engine regularly with a cloth or brush. Keep the cooling system (blower housing area) clean to permit proper air circulation which is essential to engine performance and life. Be certain to remove all grass, dirt and combustible debris from muffler area.

Deck

The underside of the mower deck should be cleaned after each use to prevent a buildup of grass clippings, leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite rust and corrosion, and may prevent proper mulching.

The deck may be cleaned by tilting the mower and scrap- ing clean with a suitable tool (make certain the spark plug wire is disconnected).

Replacing Rear Flap

The rear flap is attached to the back of the mower deck. If the rear flap becomes damaged, replace it by cutting off the flat end of the wire rod which secures it to the deck using a pair of side-cutters. Attach the new rear flap using the new rod provided with the rear flap, bending the ends of the rod over to secure.

Blade Care

Periodically inspect the blade adapter for cracks, especially if you strike a foreign object. Replace when necessary. Follow the steps below for blade service:

1.Remove the bolt and the blade bell support which hold the blade and the blade adapter to the engine crankshaft. See Figure 12.

2.Remove blade and adapter from the crankshaft.

3.The blade may be resharpened by removing it and either grinding or filing the cutting edge keeping as close to the original bevel as possible. Do not attempt to sharpen the blade while it is still on the mower.

4.It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade.

NOTE: Improper blade balance will result in excessive vibration causing eventual damage to the engine and mower. Be sure to carefully balance blade after sharpen- ing. Possible damage resulting from blade unbalance condition is not the responsibility of the manufacturer.

NOTE: Always remove blade from the adapter for testing balance.

5.The blade can be tested for balance by balancing it on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly.

6Before reassembling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil.

560 Series specifications

The MTD 560 Series represents a significant advancement in the world of outdoor power equipment, blending efficiency, durability, and innovative technology. Engineered primarily for homeowners and semi-professionals, this series includes a variety of models that cater to diverse landscaping needs, ensuring that every user finds a machine that suits their specific requirements.

One of the standout features of the MTD 560 Series is its powerful engine options. These models are equipped with robust engines that deliver impressive torque and high performance, allowing users to tackle thick grass, rugged terrain, and weed growth with ease. The engines are designed with fuel efficiency in mind, ensuring that users spend less time refueling and more time enjoying their well-manicured lawns.

Another key characteristic of the MTD 560 Series is its cutting technology. With precision-engineered blades and advanced cutting systems, these mowers provide a clean and even cut. Many models feature adjustable cutting heights, allowing users to customize their mowing experience to meet the specific needs of their grass type and yard conditions. This flexibility is essential for achieving the perfect lawn, whether for aesthetic appeal or lawn health.

Durability is a hallmark of the MTD 560 Series. Constructed with high-quality materials and robust frames, these mowers are built to withstand the rigors of regular use. Users can expect longevity and reliability, making it an investment worth considering. Additionally, many models come with protective features that guard against wear and tear, extending the lifespan of the equipment.

Comfort and ease of use are also prioritized in the design of the MTD 560 Series. Ergonomic handles minimize strain during operation, while intuitive controls make it easy for users to maneuver and operate the machines effectively. Some models even incorporate self-propelling features, reducing the physical effort required for mowing and making the experience more enjoyable.

Moreover, the MTD 560 Series embraces modern technology. Many models are compatible with smart technology, making it easier to track maintenance schedules and optimize performance. This integration ensures that users can manage their equipment efficiently, leading to better results in their landscaping efforts.

In summary, the MTD 560 Series combines powerful performance, advanced cutting technology, durability, user comfort, and modern innovations to create a versatile and reliable outdoor power solution. Whether you are a dedicated homeowner or a semi-professional landscaper, the MTD 560 Series offers the features and characteristics needed to achieve exceptional results in lawn care.

MTD 560 Series warranty Maintenance

Models: 560 Series