WARNING: The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.

Starting Engine

WARNING: Be sure no one other than the operator is standing near the lawn mower while starting engine or operat- ing mower. Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower.

1.Push primer three times. Wait about two seconds between each push. See Figure 2. In temperature around 55° F or below, prime five times. Do not prime to restart a warm engine.

2.Standing behind the mower, squeeze the blade control against upper handle. See Figure 2.

3.Holding these two handles together firmly, grasp recoil starter handle and pull rope out with a rapid, continu- ous, full arm stroke. See Figure 2. Keeping a firm grip on the starter handle, let the rope rewind slowly. Repeat until engine cranks. Let the rope rewind each time slowly.

WARNING: Wait for the blade to stop completely before doing any work on the mower or to remove the grass catcher.

Stopping Engine

1.Release blade control to stop the engine and blade.

2.Disconnect spark plug wire from spark plug and ground against the engine.

Using Your Lawn Mower

WARNING: Never operate your mower without either the rear door or the entire grass catcher assembly firmly secured.

Be sure lawn is clear of stones, sticks, wire, or other objects which could damage lawn mower or engine. Such objects could be accidently thrown by the mower in any direction and cause serious personal injury to the operator and others.

3

Figure 2

WARNING: If you strike a foreign object, stop the engine. Remove wire from the spark plug, thoroughly inspect mower for any damage, and repair damage before restarting and operating. Extensive vibration of mower during operation is an indica- tion of damage. The unit should be promptly inspected and repaired.

1.For best results, do not cut wet grass.

2.For a healthier lawn, never cut off more than one- third of the total length of the grass.

Using as Mulcher

For mulching grass, remove the grass catcher from the mower. The rear discharge door should be closed.

1.For effective mulching, do not cut wet grass.

2.New or thick grass may require a narrower cut. Adjust ground speed according to condition of lawn.

3.If the grass has been allowed to grow in excess of 4 inches, mulching is not recommended. Use the grass catcher to bag clippings instead.

Using Grass Catcher

You can use the grass catcher to collect clippings while you are operating the mower.

1.Attach grass catcher following instructions on page 7 . Grass clippings will automatically collect in the bag as you run the mower. Operate the mower till the grass bag is full.

2.Stop engine completely by releasing the blade control handle. Make sure that the unit has come to a complete stop.

3.Lift discharge door and pull grass bag up and away from the mower to dispose of the grass clippings.

4

Operating

Your Lawn

Mower

WARNING

The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.

Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower. Never run engine indoors or

in enclosed, poorly ventilated areas. En- gine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower.

9

Page 9
Image 9
MTD 588 warranty Starting Engine, Stopping Engine, Using Your Lawn Mower, Using as Mulcher, Using Grass Catcher

588 specifications

The MTD 588 is a state-of-the-art machine designed for those who prioritize efficiency and precision in their operations. As a versatile piece of equipment, the MTD 588 excels in multiple applications, making it suitable for both industrial and agricultural settings.

One of the primary features of the MTD 588 is its robust engine. Powered by an advanced high-torque engine, it ensures optimal performance under challenging conditions. The engine not only boosts efficiency but also guarantees lower fuel consumption, which translates to reduced operating costs.

Another distinguishing characteristic of the MTD 588 is its superior engineering design. The chassis is constructed from high-strength materials, providing durability and resilience against wear and tear. This rugged build allows the machine to endure harsh environments, whether it’s navigating rocky terrain or operating in wet conditions.

The MTD 588 incorporates cutting-edge technology to enhance user experience. It features an intuitive touchscreen interface that simplifies operation and monitoring. Users can easily access vital information such as engine performance, maintenance schedules, and operational parameters. This technology not only makes the machine user-friendly but also helps in reducing downtime by facilitating timely maintenance.

In terms of versatility, the MTD 588 is equipped with an array of attachments. From tillers to plows, this machine can adapt to various tasks, making it an all-in-one solution for different industries. The quick attachment system further ensures that transitioning between tasks is smooth and efficient, maximizing productivity.

Safety is also a key feature of the MTD 588. It includes advanced safety mechanisms such as emergency shut-off controls and enclosed engine compartments to protect operators from potential hazards. The ergonomic design of the operator's seat, complete with adjustable settings, ensures comfort during long hours of operation.

The MTD 588 is not only built for performance and safety but also emphasizes environmental responsibility. Equipped with a low-emission engine, it meets strict environmental standards, making it a sustainable choice for eco-conscious consumers.

In summary, the MTD 588 combines powerful performance, advanced technology, and robust design to deliver exceptional results across various applications. Its unique features, versatility, and commitment to safety and environmental standards make it a standout choice for professionals seeking reliability and efficiency in their operations.