MTD 753-05193 NOTES, Pg 2 of, Form No, Service Kit, FIGURE, WEDGE EARS, CYLINDER RAM, SHIM ASSEMBLY (ITEM 1)

9.Using two 3/4” wrenches, remove and discard the bolt and nut securing the cylinder ram to the wedge.

10.Slide the wedge away from the cylinder ram enough to slip the Shim Assembly, Item 1, between the wedge and cylinder ram. See Figure 3.

SHIM ASSEMBLY (ITEM 1)WEDGE EARSCYLINDER RAM

FIGURE 3

11.Re-align the hole in the cylinder ram end and the holes in the wedge ears.

12.Slip the new 1/2”-13 x 3.25 Screw, Item 2, through the wedge, cylinder ram and shim assembly holes.

13.Secure with the new 1/2”-13 Lock Nut, Item 3. DO NOT tighten the lock nut down. There should be only 2 to 3 threads that show past the nut.

See Figure 4.

14. This completes the installation of this service kit.

NOTES

Service Kit 753-05193 Pg 2 of 2 Form No. 769-02077