Fuel And Oil Mixture

Your snow thrower is equipped with a two-cycle engine that requires a mixture of gasoline and two cycle oil at a ratio of 50:1. Refer to the engine operator’s manual for detailed instructions regarding the mixture of oil and gasoline for your snow thrower’s engine.

Fuel Fill-Up

WARNING! Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition.

1.Check fuel level and add if necessary. Follow related instructions in the separate engine manual packed with your snow thrower .

NOTE: A plastic insert may have been placed into the fuel tank to prevent dirt and debris from entering the tank during assembly. Remove this insert before attempting to fill with fuel.

Adjustments

Chute Assembly

The pitch of the chute assembly controls the angle at which the snow is thrown.

1.Loosen the wing knob found on the left side of the chute assembly and pivot the upper chute upward or downward to the desired pitch. Retighten the wing knob before operating the snow thrower.

2.Position the chute assembly opening by using the Chute Handle to throw the snow in the desired direction. See Fig. 3-4.

Figure 3-4

Section 3 — Assembly & Set-Up