Storage

Engine to be stored over 30 days should be completely drained of fuel (gasoline) to prevent gum deposits forming on essential carburetor parts and fuel system.

WARNING: Gasoline is extremely flammable and can be explosive under certain conditions. Drain gasoline before storing the equipment for extended periods. Drain gasoline in a well-ventilated area away from any source of flame or sparks, including any appliances with a pilot light. Store gasoline in an approved container in safe location.

•Remove the spark plug cap from spark plug to prevent accidental starting the engine.

•Empty the fuel from the fuel tank with a pump or siphon.

•Fit the plug cap on the spark plug securely

•Start and run the engine at idle speed to used up the fuel in the fuel system.

WARNING: Before maintaining engine, stop the engine and allow it cool.

•Remove the spark plug and pour approx. 1-2 mL (0.06-0.1 cu.in) of new engine oil through the plug hole (A), slowly pull the recoil starter grip several times and reinstall the spark plug.

Figure 18

A. Spark Plug Hole

•Slowly pull the recoil starter grip until you feel compression and leave it there.

•Clean every part of the engine.

•After period of storage, change engine oil.

•(Refer to "Oil Change" section in "MAINTENANCE" section).

32