• Insert the upper end of the chute tube into the hole | • Secure by placing the ends of the retainer straps on |
in the cover assembly, then insert the extension | the discharge chute over the clips on the chute |
tube between the discharge chute and the chute | tube. |
tube. See Figure 6. |
|
SECTION 5: OPERATION
Grass Bag Removal
•To open the cover, simply lift up on cover. The chute tube assembly does not have to be removed.
•To remove the grass bags, lift up on bag and unhook the frame of the bag from the support tube assembly. See Figure 7A.
•To empty the grass, use the handle which is provided on the bottom of each bag.
See Figure 7B.
NOTE: Under normal usage, the grass collector is subject to wear and should be checked periodically. Be certain any replacement bag complies with the mower manufacturer’s recommendation. Wash grass bag periodically with water. Allow to air dry. Do not use heat.
A
B
Figure 7
9
