DO:

Mow across the face of slopes; never up and down. Exercise extreme caution when changing direction on slopes.

Watch for holes, ruts, hidden objects, or bumps. Tall grass can hide obstacles.

Always be sure of your footing. A slip and fall can cause serious personal injury. If you feel you are losing your balance release the blade control handle immediately and the blade will stop in less than 3 seconds.

DO NOT:

Do not mow near drop-offs, ditches or embankments. The operator could lose footing or balance.

Do not mow slopes greater than 15 degrees as shown on the slope gauge.

Do not mow on wet grass. Reduced footing could cause slipping.

3.CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the mower and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and under the watchful care of a responsible adult other than the operator.

Be alert and turn mower off if a child enters the area.

Before and while moving backwards, look behind and down for small children.

Never allow children under age 14 to operate the mower.

Use extreme care when approaching blind corners, shrubs, trees, or other objects that may obscure your vision of a child or hazard.

4.SERVICE

Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

Use only an approved gasoline container.

Never remove gas cap or add fuel while the engine is running. Allow engine to cool at least two minutes before refueling.

Replace gasoline cap securely and wipe off any spilled gasoline before starting the engine as it may cause a fire or explosion.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Never refuel machine indoors because flammable vapors will accumulate in the area.

Never store the machine or fuel container inside where there is an open flame or spark such as a gas water heater, space heater, or furnace.

Never run an engine inside a closed area.

To reduce fire hazard, keep mower free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage. Allow mower to cool at least 5 minutes before storing.

Before cleaning, repairing, or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the spark plug to prevent accidental starting.

Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., bent, cracked). Replace with blade which meets original equipment specifications.

Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly.

After striking a foreign object, stop the engine, remove the wire from the spark plug, and thoroughly inspect the mower for any damage. Repair the damage before starting and operating the mower.

Never attempt to make a wheel or cutting height adjustment while the engine is running.

Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. For safety protection, frequently check components and replace with manufacturer’s recommended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Do not change the engine governor setting or overspeed the engine. Excessive engine speeds are dangerous.

Your Responsibility

Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

Following are representations of the safety labels on your lawn mower. Maintain safety while operating the mower.

4

Page 3
Image 3
MTD M2N-L warranty Your Responsibility, Children, Service

M2N-L specifications

The MTD M2N-L is a versatile motherboard that stands out due to its robust design and a range of features that cater to various computing needs. Designed primarily for the AMD platform, the M2N-L supports the AM2 and AM2+ processor sockets, making it compatible with a variety of AMD Athlon and Phenom processors. This compatibility provides users with a wide array of options for building a system tailored to their specific needs, whether it’s for gaming, content creation, or everyday tasks.

One of the main features of the M2N-L is its support for dual-channel DDR2 memory, offering up to 8GB of RAM capacity. This enables users to efficiently multitask and run demanding applications smoothly, enhancing overall system performance. Additionally, the motherboard is equipped with several memory speed options, allowing for optimal configuration based on the user’s preference and the capabilities of the installed memory modules.

In terms of connectivity, the M2N-L includes an array of ports and slots that make it highly adaptable for various peripherals. Users will find multiple SATA ports for connecting storage devices, which support RAID configurations, ensuring both speed and data redundancy. The presence of IDE connectors also allows for legacy hard drives or optical drives to be utilized, catering to users with older components.

The M2N-L integrates high-definition audio and onboard graphics capabilities, delivering a satisfactory multimedia experience without the need for dedicated graphics cards. This feature is particularly useful for casual users who do not require extensive graphics processing power but still want decent audio and video output.

Another key characteristic is the presence of several USB ports, which allow for easy connection to a multitude of external devices like mice, keyboards, and flash drives. The Gigabit Ethernet port facilitates high-speed internet connections, ensuring quick data transfer and reliable network connectivity.

The MTD M2N-L also emphasizes efficient power management and reliability, providing stable operation even under load. This design consideration is crucial for both casual and professional environments where system uptime is paramount.

In summary, the MTD M2N-L motherboard is a well-rounded component that combines compatibility, expandability, and performance. With its support for AMD processors, ample memory options, a diverse range of connectivity features, and integrated audio-visual capabilities, it stands as a solid choice for individuals looking to build or upgrade their systems with a dependable and efficient motherboard.