SECTION 1: TO THE OWNER
The Model 118 mulch kit is designed for use with
IMPORTANT: The blades included in this kit are NOT compatible with the deck spindles found on Cub Cadet model LT 1022 lawn tractors and can NOT be safely installed and used as part of this mulch kit. Contact your Cub Cadet dealer for more information on mulch kits for Cub Cadet lawn tractors.
NOTE: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR the drawbar end.
SECTION 2: CONTENTS OF CARTON
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below. Part numbers are shown in parentheses.
One Mulch Plug |
| One Plastic Wing Nut, 1/4” | ||
Two 16.28” | Blades | One Carriage Screw, 1/4” | ||
One 14.88” | Blade |
|
| |
|
| 14.88” Blade (Short) |
|
|
Hex Flange Nuts |
|
|
| |
|
|
| 16.28” Blades (Long) |
|
Figure 1
NOTE: Many tractors manufactured by MTD are equipped with
2