7
Figure 3-4
CUTTING HEIGHT
All wheels must be
placed in the same
relative position. For
rough or uneven lawns,
move the height adjust-
ment lever to a higher
position. This will stop
scalping of grass.
3
Setup and Adjustment
Figure 3-5
Figure 3-6
IMPORTANT
This unit is shipped
without gasoline or
oil in the engine. Fill
up gasoline and oil
as instructed in the
accompanying engine
manual BEFORE
operating your mower.
4. Insert post on cable ties into holes provid ed on the
lower handle. Pull cable tie tight and trim excess. See
Figure 3-4.

Wheel Height Adjustment

5. Each wheel has a height adjustment lever to change
the cutting height of the mower.
a. Depress heig ht adjustment lever towards the
wheel.
b. Slide lever to desired p osition for a change in
cutting height. See Figure 3-5.
c. Release lever toward deck.

Converting To Side Discharge

6. Your mower has been shipped as a mulcher. To
convert it to a side-discharge mower:
a. Lift th e mulching plug.
b. Slide the t wo hooks on the side-discharge
deflector under the hinge pin on the mulching plug
assembly. Lower the mulching plug. See Figure
3-6.