3

Setup and

Adjustment

NOTE: Stand behind the mower as if you were going to operate it. Your right hand cor- responds to the right side of the mower; your left hand corresponds to the left side of the mower.

IMPORTANT

DO NOT crimp the

cables when lifting the handle up. Make sure to route the cables

under the lower handle.

NOTE: This Operator’s Manual covers several models. Lawn Mower features vary by model. Not all features discussed (or engines pictured) in this manual are applicable to all Lawn Mower models.

1.Remove any packing material which may be between upper and lower handles.

A

a. Pull up and back on upper handle as shown in

Figure 3-1. Make certain the lower handle is seated

 

securely into the handle mounting brackets.

 

b. Tighten star knobs securing upper handle to

 

lower handle. Make sure that each carriage bolt is

 

seated properly in the handle.

 

2. Locate hairpin clip on the weld pin on each side of

 

lower handle.

 

a. Remove hairpin clip from this hole. Using a pair of

 

pliers, insert hairpin clip into the other hole on the

 

weld pin. Repeat on other side. See Figure 3-2.

B

b. Insert a carriage bolt from the hardware pack into

 

the upper hole on the handle mounting bracket.

Figure 3-1

Secure with one plastic wing nut, also included in

the hardware pack. Repeat on other side.

3.The rope guide is attached to the right side of the upper handle. Loosen the wing nut which secures the rope guide.

a.Hold the blade control against upper handle.

b.Pull starter rope out of the engine. Release the blade control. See Figure 3-3.

 

 

c.

Slip starter rope into rope guide.

 

 

d.

Tighten wing nut.

B

A

Insert post on cable ties into holes provided on the

lower handle. Pull cable tie tight around cables and

 

 

handle and trim excess.

 

 

4. Follow steps below to assemble the grass catcher:

 

 

a.

Place bag over frame so that its black plastic side

 

 

 

is at the bottom.

 

 

b. Slip plastic channel of grass bag over hooks on the

 

Figure 3-2

 

frame. See Figure 3-4. All plastic channels except

 

 

center top of bag attach from outside of bag.

 

 

c.

Attach center top of bag from inside of bag.

AA

IMPORTANT

B

 

 

This unit is shipped

 

 

without gasoline or

 

D

 

oil in the engine. Fill

 

C

 

 

up gasoline and oil

C

 

B

as instructed in the

 

 

 

 

accompanying engine

 

 

 

manual BEFORE

Figure 3-3

 

Figure 3-4

operating your mower.

 

 

 

 

 

 

 



Page 6
Image 6
MTD V560 warranty Setup Adjustment, Under the lower handle

V560 specifications

The MTD V560 is a versatile and powerful lawn mower designed to meet the demands of both residential and commercial landscapers. This model integrates advanced technology and user-friendly features to ensure efficient and effective operation, making it a popular choice among users who seek reliability and performance.

One of the standout features of the MTD V560 is its robust engine. Powered by a reliable gasoline engine, the V560 boasts impressive horsepowers, providing ample power for tackling thick grass and uneven terrain. This engine is designed for fuel efficiency, ensuring longer run times while minimizing fuel consumption, which is an essential consideration for sustainability-conscious users.

With a cutting width of 21 inches, the MTD V560 allows for quick mowing of large areas, significantly reducing the time spent on lawn care. The cutting height can be easily adjusted to accommodate various grass types and conditions, giving users the flexibility to achieve their desired lawn appearance. The mower features a durable steel deck that can withstand the rigors of regular use, ensuring longevity and a finished lawn that looks pristine.

The MTD V560 incorporates innovative mulching technology that efficiently cuts grass clippings into fine pieces. This feature not only enhances the appearance of the lawn but also provides natural fertilization as clippings decompose. Additionally, the mower includes a side discharge option for users who prefer this method of grass disposal, contributing to efficient mowing operations.

User comfort is a priority with the MTD V560, which is equipped with ergonomic handles that reduce strain during extended use. The lightweight design of the mower enhances maneuverability, allowing for easy navigation around flowerbeds, trees, and other obstacles.

Another key characteristic of the V560 is its easy starting technology, ensuring that users can start mowing without hassle. Furthermore, maintenance is simplified with accessible components, enabling quick blade cleaning and oil changes.

In summary, the MTD V560 combines power, efficiency, and user convenience, making it an excellent choice for anyone looking to maintain a well-manicured lawn. With its advanced engine technology, versatile cutting options, and ergonomic design, the MTD V560 is engineered for both performance and comfort, catering to the needs of diverse lawn care enthusiasts.