This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL | MEANING | SYMBOL | MEANING |
| • SAFETY ALERT SYMBOL |
| • THROWN OBJECTS AND |
| Indicates danger, warning or caution. |
| ROTATING CUTTER CAN |
|
| CAUSE SEVERE INJURY | |
| May be used in conjunction with other |
| WARNING: Do not operate without |
| symbols or pictographs. |
| |
|
| the cutting attachment shield in place. | |
|
|
| |
|
|
| Keep away from the rotating cutting |
| • WARNING - READ |
| attachment. |
|
|
| |
| OPERATOR'S MANUAL |
|
|
Read the operator’s manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders.
• ON/OFF STOP CONTROL
ON / START / RUN
•WEAR EYE AND HEARING PROTECTION
WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1 standards and ear protection when operating this unit.
Use a full face shield when needed.
• KEEP BYSTANDERS AWAY
WARNING: Keep all bystanders, especially children and pets, at least 50 feet (15 m) from the operating area.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
• OIL
Refer to operator's manual for the proper type of oil.
• ON/OFF STOP CONTROL
OFF or STOP
• HOT SURFACE WARNING
Do not touch a hot muffler, gear housing or cylinder. You may get burned. These parts get extremely hot from operation.
They remain hot for a short time after the unit is turned off.
• SHARP BLADE
WARNING: Sharp blade on cutting attachment shield. To prevent serious injury, do not touch line cutting blade.
5