TRACTOR STORAGE

If your tractor is not going to be operated for an extended period of time (thirty days to approximately six months), the tractor should be prepared for stor- age. Store the tractor in a dry and protected location. If stored outside, cover the tractor (including the tires) to protect it from the elements. The procedures out- lined below should be performed whenever the tractor is placed in storage.

1.Change the engine oil and filter following the instructions provided in the engine information at the back of this manual.

WARNING: Never store the tractor with fuel in the tank indoors or in poorly ven- tilated enclosures, where fuel fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer, etc.

WARNING: Fuel left in the fuel tank dete- riorates and will cause serious starting problems.

2.If storing the tractor for 30 days or more:

To prevent gum deposits from forming inside the engine’s carburetor and causing possible malfunc- tion of the engine, the fuel system must be either completely emptied, or the gasoline must be treated with a stabilizer to prevent deterioration.

Using a fuel stabilizer:

•Read the product manufacturer’s instructions and recommendations.

•Add to clean, fresh gasoline the correct amount of stabilizer for the capacity (approximately 3 gallons) of the fuel system.

•Fill the fuel tank with treated fuel and run the engine for 2-3 minutes to get stabilized fuel into the carburetor.

Emptying the fuel system:

•Prior to putting the tractor in storage, monitor fuel consumption with the goal of running the fuel tank empty.

•Run the engine until it begins to stall. Use the choke to keep the engine running until all fuel in the carburetor has been exhausted.

3.Clean the engine and the entire tractor thoroughly.

4.Fully charge the battery, then disconnect the neg- ative cable at the battery to prevent possible discharge. Recharge the battery periodically when in storage.

NOTE: Remove the battery if exposed to prolonged periods of sub-freezing temperatures. Store in a cool, dry location where temperatures are above freezing.

5. Lubricate all lubrication points.

NOTE: We do not recommend the use of a pressure washer or garden hose to clean your unit. They may cause damage to electrical components; spindles; pulleys; bearings; or the engine. The use of water will result in shortened life and reduce serviceability.

REMOVING THE TRACTOR FROM STORAGE

•Check the engine oil.

•Fully charge the battery and inflate the tires to the recommended pressure.

•Add clean, fresh fuel.

•Start the engine and allow to idle for a few minutes to ensure engine is operating properly.

•Drive the tractor without a load to make certain all the tractor systems are functioning properly.

27

Page 26 Page 28
Page 27
Image 27
MTD ZT 42 Tractor Storage, If storing the tractor for 30 days or more, Using a fuel stabilizer, Emptying the fuel system
Page 26 Page 28

ZT 42, ZT 50 specifications

The MTD ZT 42 and ZT 50 are part of MTD's impressive line of zero-turn lawn mowers, crafted to provide efficient and effective mowing solutions for both residential and commercial applications. With their robust design and advanced features, they cater to users seeking performance, comfort, and reliability.

The MTD ZT 42 features a 42-inch cutting deck, while the ZT 50 boasts a larger 50-inch cutting deck. This difference in size allows users to choose the model that best fits their mowing needs, whether they are managing a small residential yard or larger commercial properties. Both models are designed with efficiency in mind, enabling users to navigate tight spaces and maneuver around obstacles with ease, thanks to their zero-turn radius capabilities.

One of the standout features of both mowers is their powerful engine. The ZT 42 is equipped with a reliable 18 HP engine, while the ZT 50 features a more robust 24 HP engine. These engines provide ample power, ensuring that the mowers can tackle thick grass and uneven terrain without compromising performance.

In terms of comfort, both models come with ergonomic seating and user-friendly controls. The plush, high-back seats offer superior support during extended mowing sessions, reducing fatigue. The intuitive controls are designed for ease of use, allowing operators of all experience levels to handle the machines effortlessly.

The cutting technology in the MTD ZT series is another highlight. Both models include a fabricated steel deck that is designed for durability and longevity. The cutting height can be easily adjusted, offering users the flexibility to achieve the desired grass length. The precision cutting blades ensure a clean cut, promoting a healthy lawn.

Furthermore, both mowers are equipped with enhanced safety features. The automatic braking system engages whenever the operator leaves the seat, preventing unintended movement. This feature, combined with responsive steering and fast speeds, ensures that the mowers are not only efficient but also safe to use.

Overall, the MTD ZT 42 and ZT 50 embody a combination of power, precision, and comfort. With their advanced technologies and robust features, they serve as excellent choices for anyone looking to maintain a pristine lawn with minimal effort. Their reliability and performance make them appealing options in the zero-turn mower market, attracting homeowners and landscape professionals alike.
Top Page Image Contents