OTHER HOME AUDIO PRODUCTS FROM MTX
MTX offers a wide assortment of audio components. Ranging from
Listed below you will find a sampling of components available from your authorized MTX dealer.
Speaker/Amplifier Selector Accommodates up to 6 pair of speakers Handles up to 250 watts/channel continuous (RMS) Impedance Protection Circuitry Accommodates up to 14 gauge wire
MODEL MP42
Two 4” Woofers, with 1/2” Balanced Dome Tweeter 50 Watts RMS/200 Watts Total Power Handling Magnetically shielded, weather resistant
Sleek,
PS15
15” Powered Subwoofer System
200 Watt Class D Switching Power Amplifier Infrared Remote Control for Volume Function
Magnetically Shielded, Downfiring Subwoofer in small enclosure Signal Sensing Auto Turn On
Red LED Clipping Indicator Speaker and Line Level Inputs
Continuously variable 50Hz to 150Hz, 24dB/Octave Crossover Frequency Response 30Hz - 150Hz
17.2” H x 17” W x 20.25” D
LOUDSPEAKER PLACEMENT
Blueprint Series Loudspeakers are designed to work within any interior decorating scheme. They can be installed in virtually any location where flush mounting is possible. To maximize their sound performance however certain guidelines should be followed. For the best stereo reproduction the two loudspeakers should be placed an equal distance from your listening position and separated so that the angle between them, at the listening position, is between 40 and 60 degrees.
For best stereo imaging, we recommend that the units be placed so that the tweeters are as close as possible to the ear level of a seated listener. As this is not always possible in keeping with aesthetic design of a particular room, the Model 620WE loudspeaker is designed with a pivoting tweeter which rotates to allow you to “aim” the high frequencies toward the listening position.
Normal Dispersion
Dispersion After Tweeter Adjustment