CONGRATULATIONS... | NOTES |
...on your purchase of a MTX powered subwoofer system. Your new subwoofer is one of the most exciting home entertainment electronic products available, adding impact and realism to recorded music and the wide variety of movies to be found on videotape, laser disc, DVD and
SUBWOOFER FEATURES
•High efficiency amplifier
•Bass reflex enclosure with low noise vent
•Adjustable
•Adjustable gain control
EXPLANATION OF FEATURES AND CONTROLS
Refer to Figure A
1)Power Switch - This two position switch controls the power status of the subwoofer. Off - Turns the unit off.
On - Turns the unit on regardless of whether a signal is present or not.
2)Subwoofer crossover - This rotary control adjusts a variable low pass filter to set the upper frequency at which the output of the subwoofer begins to
3)Line level input - These RCA phono jacks accept a line level full range signal from the
4)Speaker level input - These spring loaded terminals for speaker wire accept a stereo, speaker level, full range signal from a receiver or power amplifier. This signal is processed and amplified to power the subwoofer.
5)Fuse - For continued protection replace fuse with same type and size listed.
6)Level control - This rotary control adjusts the level of the subwoofer and is used to balance its volume with that of the main stereo speakers.
7)Status LED - This light emitting diode shows the status of the subwoofer electronics. “Red” indicates that the amplifier is plugged in and the power switch is on.
| 4 | 3 | 6 | 2 |
|
| |||
|
|
|
| 7 |
FROM AMPLIFIER | L | GAIN | FREQ | |
|
| |||
|
| R |
| POWER |
L | R |
| MIN MAX | |
LINE IN | 50Hz 150Hz | |||
HI LEVEL IN |
|
| ||
FUSE 1A/250V |
|
|
| |
5 |
|
|
| ON |
|
|
|
| |
| 1A 250V |
|
| 1 |
|
|
|
| |
|
|
|
| OFF |
| 120 VAC |
|
|
|
| 100 WATTS |
|
|
|
| 60 HZ |
|
|
|
|
|
|
| Made In China |
