Multi-Tech Systems FF100 manual Cabling Process, Connect FaxFinder to AC Outlet

Cabling Instructions FaxFinder Cabling Guide

Cabling Process

Part A: Connect the FaxFinder to Power Outlet and Ethernet

Summary: Place the FaxFinder in a convenient location, and then connect it to your AC power outlet and Ethernet.

1. Connect FaxFinder to AC Outlet.

Plug the DC power transformer into a power outlet or power strip. Secure the other end to the PWR jack on your FaxFinder. The DC power transformer is included with your FaxFinder.

Caution: Use only the DC power transformer supplied with the FaxFinder. Use of any other transformer voids the warranty and can damage the FaxFinder.

Note: The FF100’s power supply connector will be either:

(1)a plug-to-jack connection with a screw-on retaining ring, or (2) a simple plug-to-jack connection.

8 MultiTech Systems, Inc.