ISI Quick Start Guide
3
Safety Warnings z This product must be installed by a qualified service person.
z When installing or servicing this product, the phone lines must be disconnected
to remove the risk of hazardous voltages.
z Never install telephone wiring during a lightning storm.
z Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
z This product is to be used with UL and CUL listed computers.
z Never touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
z Use caution when installing or modifying telephone lines.
z Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electrical shock from lightning.
z Do not use the telephone to report a gas leak in the vicinity of the leak.
Hardware Installation Procedures To install the ISI Card into your PCI-bus computer, follow the steps presented
below.
1. Turn off your computer and any peripheral equipment connected to it. The ISI
Card can be installed in a Pentium equivalent PCI bus computer.
2. Remove the cover of your computer as instructed in your computer's
documentation.
3. Before handling the ISI Card, discharge any static in your body by touching a
piece of grounded metal such as the computer chassis.