Multi-Tech Systems MTCBA-C manual Install the Modem Driver, Introduction, Requirements

Chapter 2 – Activation and Installation

Step 4 – Install the Modem Driver

Introduction

Compatibility: The wireless modem is compatible with Windows 2000/2003+, Windows XP, and Linux.

Windows: Windows operating systems require a modem driver to be installed. The procedure differs depending on the operating system. This section provides installation procedures for Windows Operating Systems 2000/3000/XP. See the example below for Windows 2003/XP installation.

Linux: Linux does not require a driver for serial modems.

Requirements

•One MTCBA-C modem

•A RS-232 cable to connect the modem to the PC

•The MultiModem CD that was shipped with the Multi-Tech modem

•A PC running Windows

Note: This installation procedure is only used as a basic guide to help you install the Multi-Tech Wireless modem driver. You may see differences in your setup based upon your version of Windows and your Windows settings.

Installing the Multi-Tech MTCBA-C Modem Driver onto a PC Running Windows XP/2003

This installation assumes a Windows XP or 2003 operating system. XP and 2003 are identical in the methods they use for installing modem drivers.

To load the MultiModem wireless modem’s driver on your PC, select the Control Panel’s Phone and Modem Options option. During this installation, you will be required to browse the MultiModem CD to load the modem’s INF file. This file is located at the root directory on the MultiModem CD.

1.Go to Start, and then click on Control Panel.

2.In the Control Panel, double-click on Phone and Modem Options. When the Phone and Modem Options screen appears, click on the tab labeled Modems.

3.Click Add to add a new modem.

4.On the Install New Modem screen, click Don’t detect my modem, I will select it from a list. Then click Next >.

5.On the next screen, click the Have Disk button to browse for the driver file on the MultiModem CD.

6.Make sure that the Multi-Tech system CD is inserted into your CD-ROM then click Browse.

7.Browse to the root directory of your CD-ROM drive and then click Open.

8.The Install From Disk screen should now show the directory of your CD-ROM. Click OK.

9.On this next screen, scroll down the list of modems and select the model that is applicable to your modem. Once you have selected your model, click Next>.

10.You will now have to choose the com port to which the Multi-Tech modem is connected. If you know exactly which port your modem is on, click on that port; otherwise, choose COM1 (most common). Click Next >.

11.You will now be prompted with a screen that states that the Multi-Tech driver has not passed the Windows logo testing. You can ignore this message and click Continue Anyway.

12.To finish the installation, click Finish.

You have now successfully installed the Multi-Tech wireless modem driver to your PC.

Verifying That Your Modem Has Been Installed Successfully

1.After you have successfully installed the Multi-Tech modem driver as stated above, you should be brought back to the Phone and Modems Options screen. Make sure that the modem is now listed under the columns Modem and Attached To (the correct com port).

2.Highlight the modem and then click Properties.

3.A Properties screen will open for the Multi-Tech modem. Click on the tab labeled Diagnostics.

4.In the middle of the screen, click on the Query Modem button. Windows will now try to query the Multi-Tech modem. If this process passes, the second box on this screen will show the columns Command and Response.

Note: To make sure that the modem is correctly being queried, look at the LED lights of the modem after you click on Query Modem. The TR light should come on and the TD and RD lights should flicker.

5.If this process passes, then the modem should be properly installed and ready for use. Click OK to close the modem Properties window. Then click on OK to close the Phone and Modem Options window.

Multi-Tech Systems, Inc. MultiModem CDMA Wireless Modem User Guide 16