Multi-Tech Systems MTCBA-E quick start Optional - Attach the Modem to Flat Surface

MultiModem EDGE Wireless Modem

Note

For automotive applications, you can use permanent “+” or key-switched “+” according to the type of application. Connect the power supply to its source (for example, in a mobile situation, to the vehicle’s DC fuse/terminal block).

Warning

Do not connect your wireless modem directly to a vehicle’s battery for your power source. Doing so may cause power spikes. If you wish to use the battery as a power source, add a filtering device to the DC input.

Optional – Attach the Modem to Flat Surface

The MultiModem is mounted against a flat surface with the mounting bracket and two mounting screws. Drill the mounting holes at the desired mounting location. The mounting holes must be separated by 125mm (4 -15/16 inches) center-to-center. Slide the mounting brackets into slot on the back side of the MultiModem chassis. Attach the MultiModem to the surface with two mounting screws.

Multi-Tech Systems, Inc. Quick Start Guide 7