Configuration

Configuration Utility

The Wireless USB uses its own management software. All functions you can control are provided by the Configuration Utility. Usually, this application starts automatically. To start the utility manually, click the Start button, > Programs,

>UBS 11 Mbps Wireless Network Adapter.

A new iconshould appear in your Icon tray. If the icon is green, the Wireless USB adapter is configured right. If the icon is red, the Wireless USB adapter configuration is invalid or complete. In this case, re-check your configuration by following the same steps you will use in this chapter to set the initial configuration.

Figure 1. Icon Tray with a New Icon

To start the configuration, double click on the Wireless Network Adapter icon. The USB 11Mbps Wireless Configuration Utility screen displays.

The Configuration Utility Screen with the Status Tab Displayed

A Note about Navigation: You can navigate through the tabs by clicking on the tab. The OK button accepts the information and closes the dialog box.

Other ways to navigate in Windows: The – button (upper right corner) minimizes the window. The X button closes the application.

7