Maintenance, Bronze wear bushing replacement

maintenance

DRIVE MOTOR MAINTENANCE

1.Visually inspect the motor daily before use for defective or missing parts, and have repairs made before use.

2.Inspect brushes frequently and replace when they become worn to a length of 3/8". See Length A in Figure 8.

Figure 8. Brush Length

3.Keep air inlet and air exit louvers clean and free of concrete and debris. Failure to do so will result in rapid motor overheating and parts failure.

4.Clean air filter as needed. If unit is used in high dust areas, filter will have to be cleaned more often.

5.Use a screw driver to tighten brush caps. DO NOT OVERTIGHTEN. The brush cap must be tight enough that the brush holder does not move.'

bronze wear bushing replacement

Refer to Figure 9 for location of parts.

SLOTTED SPRING PIN

QUICK-DISCONNECT KNOB

SPRING HOUSING

COMPRESSION SPRING

LOCK PIN

BRONZE WEAR BUSHING

SHAFT COUPLING

OUTPUT ENDBELL SHAFT

Figure 9. Bronze Wear Bushing

1.If installed, remove head assembly and shaft coupling.

2.Remove slotted spring using hammer and punch of appropriate size.

3.Once the pin is removed, the quick-disconnect knob, compression spring, and lock pin can easily be removed.

flexshaft lubrication (100 Hours)

4.Using a bench vice and wrench, remove coupler from flexshaft as shown in Figure 10. Please note threads are right-handedon this side of the flexshaft (drive motor end).

5.Heat should be applied to the threads to break down the anaerobic sealant. Applying heat will help prevent possible damage to threads.

6.Next, using a wrench and bench vise if necessary, remove flexible shaft from vibrator head as shown in Figure 10. Please note threads are left-handedon this side of the flexshaft (vibrator end).

7.Pull the wire core out from casing. Using a clean soft cloth, wipe the grease off as the wire core is pulled

from the casing. Wipe clean.

APPLY

COUPLER HEAT

		FLEXSHAFT
RIGHT-HAND		APPLY
RIGHT-HAND		HEAT VIBRATOR
THREAD		HEAT VIBRATOR
		HEAD
	BENCH	LEFT-HAND
	VISE	LEFT-HAND
	VISE	THREAD
		THREAD

Figure 10. Removing Wire Core

8.Inspect the core for broken wires, permanent set, or other damage such as an area that indicates high wear or having overheated. If any of these conditions exists, replace wire core.

page 20 — CV sERIES vibrator motor • operation and parts manual — rev. #0 (04/30/13)

CV3A/3B, CV1A, CV2a/2B specifications

Multiquip has established a strong presence in the construction and equipment rental industries with its versatile range of products, including the CV2A/2B, CV1A, and CV3A/3B concrete vibrators. These models are designed to enhance the efficiency and quality of concrete placements, making them essential tools for contractors and construction professionals.

The CV2A and CV2B are two models that stand out due to their user-friendly design and powerful performance. Both models feature a robust 1.5 HP electric motor that delivers consistent vibration to ensure uniform consolidation of concrete. The CV2A model is equipped with a 10-foot shaft, while the CV2B provides a longer 12-foot shaft, making them suitable for a variety of applications, from small to large pours. The ergonomic handle and lightweight construction allow for easy maneuverability, reducing operator fatigue.

The CV1A, on the other hand, is a more compact option that excels in smaller job sites and tight spaces. It features a 1 HP motor and a 6-foot shaft, making it perfect for residential projects and delicate applications. Its simple, straightforward controls make it easy for operators to achieve optimal vibration levels without extensive training.

For larger-scale operations, the CV3A and CV3B vibrators deliver unparalleled performance, capable of handling substantial concrete loads with ease. Both the CV3A and CV3B feature powerful 2 HP motors and longer shaft lengths, with 10 feet for CV3A and 12 feet for CV3B. These models are designed for heavy-duty applications, making them ideal for commercial and industrial construction projects.

One of the standout features across all these models is their durable construction. Built with high-quality materials, they can withstand the rigors of daily use on construction sites. Additionally, the vibrators are designed with maintenance in mind, featuring accessible components that streamline upkeep and repairs.

Furthermore, Multiquip's focus on safety is evident in these models, which include protective features to prevent overheating and electrical overloads. This commitment to safety, combined with their powerful performance and innovative design, makes the Multiquip CV2A/2B, CV1A, and CV3A/3B concrete vibrators reliable choices for any concrete-related task, ensuring solid results and increased productivity on the job site.

Multiquip CV2a/2B Maintenance, Bronze wear bushing replacement, Flexshaft lubrication 100 Hours

Models: CV3A/3B CV1A CV2a/2B