GB2000 CSA BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #1 (02/25/14)— PAGE 33
MAINTENANCE
6. Secure lamp holder on top of the lamp.
7. Reinstall lamp guard.
8. Pull down balloon and zip the bottom zipper to cover
lamp.
REPLACING BALLOON
1. Unzip the top and bottom of the balloon. See Figure 27.
Figure 27. Unzipping Balloon
2. Slide out the old or worn balloon over the top of the
lamp guard assembly. See Figure 28.
Figure 28. Removing Old Balloon
NOTICE
Do not use excessive force when screwing the lamp to
prevent lamp from breaking.
UNZIPTOP AND
BOTTOM
ZIPPERS
BALLOON
REMOVEOLD
BALLOON
3. Slide in the new replacement balloon over the top of
the lamp guard assembly. See Figure 29.
Figure 29. Replacing Balloon
4. Zip up the top and bottom of the new balloon. See
Figure 30.
Figure 30. Zipping Up New Balloon
INSTALLNEW
BALLOON
ZIPUP
NEWBALLOON