Multiquip manual MVH-R60H Maintenance, Inspection and Maintenance ServiceTables, Daily Service

Maintenance

CAUTION - General Maintenance Safety

Inspection and other services should always be carried out on hard and level ground with the engine shutdown.

Inspection and Maintenance ServiceTables.

To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7.

Daily Service

zCheck for leakage of fuel or oil.

zCheck for loose screws including tightness. See Table 7 below (tightening torque ), for retightening:

zRemove soil and clean the bottom of compaction plate.

zCheck hydraulic pump, piping and hose for any leakage. A loosened hydraulic hose can be a cause for leakage. Check hydraulic hose connections with wrench applied for tightness.

zCheck engine oil, see Inspection section.

These inspection intervals are for

NOTE operation under normal conditions. Adjust your inspection intervals based on the number hours plate compactor is in use, and particular working conditions.

TABLE 5. TIGHTENING TORQUE

(in. kg/cm) Diameter

Material	6mm	8mm	10mm		12mm	14mm	16mm	18mm	20mm
4T	70	150		300	500	750	1,100	1,400	2,000
6-8T	100	250		500	800	1,300	2,000	2,700	3,800
11T	150	400		800	1,200	2,000	2,900	4,200	5,600
*		100			300 ~ 350			650 ~ 700
		(6mm)				(8mm)		(10mm)

* (In case counter-part is of aluminum)

Material and quality of material is marked on each bolt, and screw.

Note: Threads in use with this machine are all right handed

MVH-R60H — MAINTENANCE

TABLE 6. MACHINE INSPECTION

Item	Hours of Operation	Remarks
(Starting check)	Every 8 hours
	(every day)
Loosened or lost	Every 8 hours
screws	(every day)
Damage of any part	Every 8 hours
	(every day)
Function of controlling	Every 8 hours
system part	(every day)
Leak of hydraulic	Every 100 hours	See page 21.
system
Vibrator oil check	Every 300 hours	See page 22.
Vibrator oil replacement	Every 100 hours	See page 22.
Hydraulic oil check	First 200 hours, then	See page 23.
	every 1000 hrs.
V-belt (clutch) check	Every 200 hours	See page 22.

TABLE 7. ENGINE INSPECTION

(For details, see separate Engine Manual)

Item Hours of Operation

Every 8 hours

Leakage of oil or fuel

(Check Daily)

Tightness of fastening threads Every 8 hours (Check Daily)

Engine oil check	Every 8 hours (Check Daily)
and replenishment	(Replenish to specified max. level)
Engine oil replenishment	First 20 hours, then every 100 hours
Air cleaner cleaning	Every 50 hours

NOTE	Fuel piping and connections should
	be replaced every 2 years.

PAGE 20 — MVH-R60H— OPERATION AND PARTS MANUAL — REV. #1 (09/09/04)