Multiquip WM-90P Drum Bearing Bracket, CAP, Dust, Separately, FITTING, Grease, WASHER, Flat 3/8

WM-90S/P MIXER — STEEL DRUM ASSY.

STEEL DRUM ASSY.
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	530028	DRUM BEARING BRACKET	2
2	3249	CAP, DUST	1
3	20561-001	BEARING SEALED	2	SET SCREWS AND BEARING
		..........................................................................................		COLLAR CANNOT BE PURCHASED
4	491008	CAP,..........................................................................................GREASE FITTING	2	SEPARATELY.
5	EM916019	FITTING, GREASE	2
6	EM969013	NUT, LOCK 3/8"	12
7	3019092	WASHER, FLAT 3/8"	4
8	514778	TRUNNION HUB	2
9	513453	ROLL PIN 3/16" X 3/4"	2
10	20654-001	SEAL, SHAFT (BLACK)	2
11	530029	RING, RETENTION	2
12	20104-002	SEAL, SHAFT URETHANE (YELLOW)	2
13	504943	BOLT, FHCS 3/8" NC X 2" G5	8
14	514786	DRUM, STEEL	1
15	492484	SET SCREW	2
16	530043	MAIN GEAR	1
17	501016	KEY, 3/8" X 88 MM	1
18	17985-012	CARRIAGE BOLT 3/8-16 X 1-1/2"	4
19	514752	SHAFT, PADDLE	1
20	492600	WASHER, FLAT 1/2"	4
21	514945	LIFT BAR	1
22	EM925191	PIN, COTTER	1
23	514946	GRATE	1
24	505070	PIN, COTTER	2
25	492556	HEX NUT 1/2" G5	2
26	6109180	WASHER, LOCK 1/2"	2
27	EM963692	BOLT 1/2" UNC 1-1/2"	2
28	EM963102	CAPSCREW, HHCS 1/2" NC X 1-1/4"	1
29	492584	NUT, LOCK1/2" NC	1
30	201537	HANDLE DUMP	1
31	EM98195	GRIP, DUMP HANDLE	1

WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 15