Murphy L1100 Series, LS200 Series warranty Pending, LS200N, Warranty

LS200 & L1100 Series Liquid Level Switches

LS-04004B

Effective 02-04

Catalog Section 15

(00-02-0561)

FWMurphy

Electric Switch

Pending

LS200 Liquid Level Switches with 2” NPT mounting are float activated to operate an electrical SPDT snap switch (optional DPDT on LS200 models) for alarm or shutdown of an engine or electric motor. The LS200 screws directly into the vessel wall and can be used with a weld collar or external float chamber. L1100 models (1-1/2” NPT) are available.

Pneumatic

Switch

■Designed for Harsh Gas Compressor Scrubber Applications

■304 Stainless Steel Float Operates in 0.5 Specific Gravity and Heavier Fluids

■LS200 Series Rated for 2000 psi (13.8 MPa) [138 bar] Working Pressure

■Electric and Pneumatic Models Available

■Improved Design Provides Better Snap Action and Dependability with Reduced Number of Moving Parts

■All Models Screw Directly Into the Vessel or Can Be Mounted Via External Float Chamber

■Nickel Plated Body to Provide Improved Corrosion Protection

■Improved Float Connection Thread Design Provides a More Secure Connection

■Listed for Class I, Div. 1, Grp. C & D Locations

■Canadian Registration Number OF1476.2

LS200NDVOR is a float-activated, pneumatic-vent level device used to operate dump valves or similar devices.

The Murphy Gas Compressor Scrubber Level System (SLS)

The LS200NDVOR provides a 2” NPT mounting with a pneumatic snap action output for interfacing with pneumatic devices such as our DVU scrubber dump valve or with other pneumatic instrumentation. This unit is supplied with a pressure filter regulator and Murphy pressure gage which are recommended for improved system life and trouble-free operation.

LS200NDVO

Pneumatic level switch with snap action Dump Valve Operator (DVO) without the Pressure Regulator for those applications

The system provides for liquid control in gas scrubber applications, by dumping liquids to drain and protecting compressors with a high liquid level switch. Wetted metal parts are made to survive constant use in corrosive environments. See Bulletin: SLS-04005B for more details.

Filter/Regulator &

MURPHYGAGE®

High Level Shutdown Switch

Stainless steel float actuated level switches to alarm and/or shutdown the equipment.

LS200: 2” NPT pipe connection; Rated 2000 psi (13.7MPa) [137bar]; Class I, Division 1. SPDT snap-switch standard. DPDT Optional.

All Stainless Steel available.

Control

Panel

where the system provides a filter regulator for “instrument quality” air or gas as the control medium.

LS200N

“Instrument

Quality Air/Gas

Supply”

Pneumatic level switch without the DVO and filter regulator.

Warranty

A limited warranty on materials and workmanship is given with this FWMurphy product. A copy of the warranty may be viewed or printed by going to www.fwmurphy.com/warranty.asp.

Pneumatic Level Control

Float actuated level snap-acting switch controls pneumatic pressure to open and close dump valve.

LS200NDVOR: Dump Valve Operator,

pressure regulator, and pressure

indicating MURPHYGAGE.®

Pneumatic Dump

Valves See DVU-01069B for more details.

Two piece union design with manual valve operator allows soft plug and hard seat to be replaced without disassembling outlet piping or scrubber pipe connection. Diaphragm actuated valves operate on 30-70 psi (207-483 kPa; 2-5 bar).

	FWMurphy
FWMurphy	P.O. Box 470248 Tulsa, Oklahoma 74147 USA +1 918 317 4100 fax +1 918 317 4266 e-mailsales@fwmurphy.com website www.fwmurphy.com
	Control Systems & Services Division, P.O. Box 1819; Rosenberg, TX, 77171 USA • 281-633-4500; fax + • 281-633-4588