Introducing the
iGUARD™ Gen-Set
Controller
The most versatile controller for your engine-driven generator set applications. Designed to work with today’s electronic engines accepting SAE-J1939 protocol.
The iGUARD™ also works with non-electronic engines.
The new iGUARD™ controller can be used for all gen-set applications: single-phase or three-phase, and 12 or 24 V. Engine speed can be read from a magnetic pickup or SAE-J1939, and/or AC frequency. Both RS232 for connection to computers, and RS485 MODBUS ports for PowerView Gages, Remote Relay Boards, or communication devices. Designed to meet and exceed NFPA-110, the iGUARD™ has flexible inputs and outputs to more than meet the requirements.
The iGUARD™ features a 64 x 128 pixel full-graphic backlighted LCD display. The microprocessor is flash-based, the controller can be easily re-programmed from the front panel or updated using a PC in the field.
REMOTE RELAY BOARD for iGUARD Controllers
This powerful Remote Relay Board allows for additional input/output capabilities enhancing the iGUARD to handle more applications.
And for SAE-J1939 CAN equipment applications use the microprocessor-
based PowerView Analog Gages.
AC Frequency | AC Amps | AC Volts | kiloWatts |
Now you can send all your AC parameters as data to these PowerView MODBUS Gages. No need to send live AC voltages and current long distances.
For More Details, Ordering or dealer Information Call 918-317-4100 or visit www.fwmurphy.com | 1 |