Murphy ST Series Accessories and Options, TDST3-5 and TDST8-10, Gimbal and Flange Mounting Kits

SPECIFICATIONS		Models
Specifications
	ST5AS	ST10AS	ST5DAS	ST8	STA16
Number of Alarm Points
• 5 Visual
• 10 Visual
• 8 First Out Visual
• 16 Visual
Audible Alarm
• 1 local; common to all inputs
• 1 local; common to all inputs except battery charger malfunction and generator operating
Alarm Silence: Silences audible only
Test Push Button: Tests all LED's
Alarm Output: Customer supplied relay same voltage as input; coil not to exceed 500 mA.
Input Voltage
• 8-32 VAC / 8-40VDC
• 12 or 24 VDC (specify)
Startup Time Delay: Customer selectable: 25-35 seconds
Sensor Input
• Accepts N.O. positive or negative
• Accepts N.O. and/or N.C.
Mounting Options
• Less Mounting kit
• Flange Mounting kit
• Gimbal Mounting kit
First Out Shutdown: Amber-No;Red-Yes
Shutdown Relay Output: SPDT dry contacts; 2 A @ 28 VDC
Alarm Reset: Repair fault; contacts open
Shutdown Reset: Repair fault; contacts open; push reset button; remove power
Battery Charger Malfunction: Built-in sensing; visual alarm only
Shipping Weights
• 1.25 lbs (567 g)
• 1.50 lbs (680 g)
• 2 lbs (907 g)
Shipping Dimensions
• 6-1/4 x 6-1/4 x 6-1/4 in. (159 x 159 x 159 mm)
• 12 x 7-1/2 x 5-1/2 in. (305 x 191 x 140 mm)

ACCESSORIES and OPTIONS

TDST3-5 and TDST8-10

TDST3-5 and TD8-10 single point time delays inhibit sensor input to ST Series annunciators for 3-5 or 8-10 seconds. Compensates for momentary contact operation due to vessel movement, etc.

GIMBAL and FLANGE Mounting Kits

These kits are available for change-over mounting and as service parts. They fit all “LM” (less mounting) configurations.

25700007 Gimbal mount kit fits ST5ASLM. 25020138

25700008 Flange mount kit fits ST5ASLM. 25020139

25700034 Gimbal mount kit fits ST10ASLM, ST5DASLM and ST8LM. 25020141 25700371 Flange mount fits ST10ASLM, ST5DASLM and ST8LM. 25020142

FLANGE Mount

GIMBAL Mount

ST-95046B page 4 of 6