OPERATION

OPERATING TIPS

1.Check the blade rotation control for correct adjustment. For the blade(s) to disengage correctly, the adjustment must be cor- rect.

2.Before you use the unit, check the oil in the engine and add oil if necessary.

3.If the engine will not start, first make sure the wire is attached to the spark plug.

4.Make sure all the belts are inside all the belt guides. See the in- structions on how to remove and install the motion drive and mower drive belts.

5.Before you make an inspection, adjustment (except for the car- buretor) or repair, make sure the wire from the spark plug is dis- connected.

6.Make sure the seat switch wire is connected. If the wire is not connected, the engine will not start.

7.For longer life of the battery on electric start models, charge the battery every three months.

8.Use the shift lever to change the ground speed, not the throttle control.

9.Belt noise can occur when the blade or clutch is engaged. This noise is normal and does not affect the operation of the unit.

MOWING AND BAGGING TIPS

1.For a lawn to look better, check the cutting level of the mower housing. See “How To Level The Mower Housing” in the Main- tenance section.

2.For the mower housing to cut level, make sure the tires have the correct amount of air pressure (PSI).

3.Every time you use the unit, check the blade. If the blade is bent or damaged, immediately replace the blade. Also, make sure the nut for the blade is tight.

4.Keep the blade(s) sharpened. Worn blades will cause the ends of the grass to turn brown.

5.Do not cut or bag grass that is wet. Wet grass will not discharge correctly. Let the grass dry before cutting.

6.Use the left side of the mower housing to trim near an object.

7.Discharge the cut grass onto the mowed area. The result is a more even discharge of cut grass.

8.When you mow large areas, start by turning to the right so that the cut grass will discharge away from shrubs, fences, drive- ways, etc. After one or two rounds, mow in the opposite direc- tion making left turns until finished (Figure 10).

9.If the grass is very high, cut two times to decrease the load on the engine. First cut with the mower housing in the highest posi- tion and then lower the mower housing for the second cut.

10.For better engine performance and an even discharge of the cut grass, always operate the engine with the throttle in FAST position.

11.When you use a bagger, operate the engine with the throttle in FAST position and the shift lever in first or second gear.

12.For better cutting performance and a quality cut, mow with the shift lever in one of the slower speeds.

13.After each use, clean the bottom and top of the mower housing for better performance. Also, a clean mower housing will help prevent a fire.

Figure 10

F-040717L

19

Page 18 Page 20
Page 19
Image 19
Murray 387002x92A manual Operating Tips, Mowing and Bagging Tips
Page 18 Page 20

387002x92A specifications

Murray 387002x92A is a notable piece of equipment in the realm of power tools, designed to deliver exceptional performance and reliability for a variety of tasks. As a sophisticated model, it showcases numerous features and technologies that set it apart in the market.

One of its main features is the powerful motor, which ensures optimal performance for heavy-duty jobs. This motor is designed to generate substantial torque, making it suitable for both light and heavy applications. The lightweight build of the Murray 387002x92A also enhances its usability, allowing for easy maneuverability without sacrificing power. This combination of strength and ease of use makes it a favorite among both professionals and DIY enthusiasts.

Another significant characteristic of the Murray 387002x92A is its precision engineering. The design integrates advanced technology that allows for accurate cuts and operations, ensuring that users achieve the best possible results. This is particularly useful in projects that require meticulous attention to detail, as it minimizes the risk of error.

The tool incorporates state-of-the-art safety features, including slip-resistant grips and an emergency shut-off mechanism, which enhances user safety during operation. These safety measures are crucial for protecting users from accidents while ensuring that they can focus on their work without distraction.

Moreover, the Murray 387002x92A is built with durability in mind. The materials used in its construction are resistant to wear and tear, making it a long-lasting investment for users. This resilience ensures that the equipment can withstand tough working conditions and remain functional over time.

In terms of versatility, the Murray 387002x92A excels with its myriad of attachments and accessories that allow for a wide range of applications. Whether it's woodworking, metal fabrication, or other complex tasks, this model can adapt to meet various needs.

Maintenance is also simplified with the Murray 387002x92A, as its design facilitates easy cleaning and part replacement. This feature helps in prolonging the lifespan of the tool, keeping it in excellent condition for years to come.

In summary, the Murray 387002x92A stands out for its powerful performance, precision engineering, robust safety features, and impressive versatility. It is an ideal choice for those who seek a reliable and efficient tool capable of handling a diverse range of projects, making it a valuable addition to any toolbox.
Top Page Image Contents