MAINTENANCE

HOW TO LEVEL THE MOWER HOUSING

If the mower housing is level, the blade will cut easier and the lawn will look better.

WARNING: Before you make an inspection, adjust- ment, or repair to the unit, disconnect the wire to the spark plug. Remove the spark plug wire to prevent the engine from starting by accident.

1.Make sure the unit is on a hard flat surface.

2.Check the air pressure in the tires. If the air pressure is incor- rect, the mower housing will not cut level. Make sure the tires are inflated to 14 PSI. (1 BAR).

IMPORTANT: On models equipped with gauge wheels, the gauge wheels must be removed to correctly adjust the level of the mower housing.

3.Some models have gauge wheels on the mower housing. If equipped, remove the gauge wheels.

4.Open the cover.

5.Move the lift lever to the LEVEL ADJUSTMENT position (Figure 23).

WARNING: The lift lever is spring loaded. Make sure the lift lever is locked in the LEVEL ADJUSTMENT position.

6.Loosen the left and right adjuster knobs (Figure 24). Push down on each side of the mower housing. Make sure both sides of the mower housing are setting on a flat surface. Also, make sure the lift links are loose and can easily move up or down.

7.Push down on the lift links and tighten the left and right adjust- er knobs (Figure 24). Make sure the adjuster knobs are tight. If necessary, use a wrench to tighten the adjuster knobs. For plastic adjuster knobs, tighten to a torque of 7 foot pounds (9,5 N–m). For metal adjuster knobs, tighten to a torque of 10 foot pounds (13,5 N–m).

8.Raise the lift lever from the LEVEL ADJUSTMENT position to a CUTTING HEIGHT position (Figure 25).

9.Close the cover.

10.If equipped, install the gauge wheels.

11.Mow for a short distance. If the height of cut is not level, repeat the above steps.

CAUTION: Do not operate with the mower housing in the LEVEL ADJUSTMENT position. If you operate in the LEVEL ADJUSTMENT position, the mower housing and blades can be damaged.

Lift Lever

 

Cover

Cutting Height Positions

 

Level Adjustment Position

 

Figure 23

Lift Link

 

Adjuster Knobs

Figure 24

Lift Lever

Cover

Cutting Height Positions

Figure 25

F–030745L

27

Page 26 Page 28
Page 27
Image 27
Murray 405000x8B manual HOW to Level the Mower Housing
Page 26 Page 28

405000x8B specifications

The Murray 405000x8B is a robust, high-performance piece of equipment designed for industrial applications that require precise engineering and unparalleled efficiency. Known for its reliability and innovative features, the 405000x8B is a standout in the world of advanced machinery.

One of the main characteristics of the Murray 405000x8B is its powerful engine, which delivers exceptional output while maintaining energy efficiency. This system incorporates advanced fuel injection technology that optimizes combustion, ensuring less fuel consumption without sacrificing performance. This not only makes the equipment environmentally friendly but also reduces operating costs significantly.

In terms of design, the 405000x8B boasts a compact yet sturdy construction that allows it to operate effectively in a variety of environments. Its lightweight framework enhances maneuverability while maintaining durability, enabling it to adapt to both on-site and off-site applications. Additionally, the unit is equipped with an advanced cooling system that prevents overheating, ensuring optimal performance even in demanding conditions.

The Murray 405000x8B also features cutting-edge automation technologies that enhance usability and control. Users can take advantage of an intuitive interface that simplifies operation and monitoring. This includes real-time data displays that provide insights into performance metrics, allowing for proactive maintenance and reducing downtime.

One of the hallmark technologies of the 405000x8B is its integration with IoT (Internet of Things) capabilities. This feature enables remote monitoring and telemetry, allowing operators to track performance and receive alerts for any anomalies. Such connectivity enhances operational efficiency and facilitates timely maintenance actions.

Moreover, the unit is designed with safety in mind. It includes a host of integrated safety features, such as automatic shutoff mechanisms and emergency backup systems, ensuring the protection of operators and the equipment itself.

In summary, the Murray 405000x8B is a versatile and efficient piece of industrial machinery that combines powerful performance with innovative technologies. Its robust design, intelligent automation capabilities, and safety features make it an ideal choice for a wide range of applications, solidifying its reputation as a leader in the industry. Whether used in manufacturing, construction, or other sectors, the 405000x8B is engineered to deliver results that businesses can rely on.
Top Page Image Contents