ASSEMBLY
HOW TO INSTALL THE SEAT
Use the fasteners shown below to install the seat. The fasteners are shown at full size.
3.Check the operating position of the seat. If the seat needs to be adjusted, loosen the two wing bolts. Slide the seat forward or backward along the seat adjusting holes as shown. Tighten the wing bolts (A).
|
| Seat |
|
|
| Seat Hinge | |
|
|
| Seat |
(A) | (B) | Adjusting Hole | |
|
| ||
1001054 | 17x47 | B |
|
|
| A | |
|
|
| |
1. Carefully remove the plastic bag from the seat. |
|
| |
2. Align the holes in the seat hinge to the holes in the seat |
|
| |
(Figure 1). Fasten the seat to the seat hinge with the fasteners |
| Figure 1 | |
as shown. |
|
| |
|
|
| |
HOW TO ASSEMBLE THE STEERING WHEEL | Decal |
| |
Fasteners are not required to assemble the steering wheel. Attach |
| ||
(Optional) |
| ||
the steering wheel as follows: |
| Cover |
|
1.Make sure the front wheels point forward.
2.Look at the hub of the steering wheel. Make sure the locking clip is in place inside the hub.
Steering Wheel
3.Slide the bellows over the steering post (Figure 2).
NOTE: Before attachment of the steering wheel, make sure that the front wheels point forward and are straight. For proper alignment of the steering wheel, see Figure 2.
4. | Slide the steering wheel onto the steering post. Push on the | Bellows |
| steering wheel. The steering wheel will lock onto the steering |
|
| post. Pull on the steering wheel. Make sure the steering wheel | Steering Post |
| is locked in place. |
|
5. | Attach the cover to the steering wheel. | Straight |
6.Some models have an optional decal in the parts bag. Attach
the decal to the center of the steering wheel as shown. | Figure 2 |
11 |
