MAINTENANCE

MAINTENANCE CHART

FREQUENCY

MAINTENANCE REQUIRED

COMMENTS

 

 

 

Daily or before each

Maintenance engine.

Refer to the Engine Owner’s Manual.

use

 

 

 

 

 

 

Examine blade(s).

Check for cracks, wear, and excessive

 

 

damage.

 

 

 

 

Remove debris from unit and mowing area.

 

 

 

 

 

Examine all rotating and sliding parts.

 

 

 

 

 

Check tire inflation.

Refer to the Maintenance section.

 

 

 

 

Verify that the mower housing is level.

Refer to the Maintenance section.

 

 

 

 

Examine V-belts.

Check for cracks, wear, and excessive

 

 

damage.

 

 

 

 

Check brake operation.

Refer to the Operation and Maintenance

 

 

sections.

 

 

 

After completion of

Change oil.

Refer to the Engine Owner’s Manual.

first 5 hours

 

 

 

 

 

After 25 hours

Maintenance engine.

Refer to the Engine Owner’s Manual.

 

 

 

 

Remove, examine, sharpen, and balance

Refer to Maintenance section.

 

blade(s).

 

 

 

 

 

Check adjustments:

Refer to Maintenance section.

 

a. Blade Rotation Control

 

 

b. Brake

 

 

c. Clutch

 

 

d. Steering

 

 

 

 

 

Lubricate chassis and mower housing.

Refer to Where to Lubricate instructions.

 

 

 

 

Check the muffler:

Refer to Maintenance section.

 

a. Torque

 

 

b. For wear or burn out

 

 

c. Condition of spark arrestor, (if applicable).

 

 

 

 

Before storage of 30

Prepare engine for storage.

Refer to the Engine Owner’s Manual.

days or more

 

 

 

 

 

 

Drain fuel system.

Refer to warnings in the Owner’s Manual.

 

 

 

 

Add fuel stabilizer.

Refer to the Engine Owner’s Manual.

 

 

 

 

Prepare battery for storage:

 

 

a. Remove from unit.

 

 

b. Fully charge.

 

 

c. Move to cool dry place.

 

GENERAL RECOMMENDATIONS

1.The owner’s responsibility is to maintain this product. This will extend the life of the product and is also necessary to maintain warranty coverage.

2.Check the spark plug, drive brake, lubricate the unit, and clean the air filter once a year.

3.Check the fasteners. Make sure all fasteners are tight.

4.Follow the Maintenance section to keep the unit in good operat- ing condition.

WARNING: Before you make an inspection, adjust- ment, or repair to the unit, disconnect the wire to the spark plug. Remove the wire from the spark plug to prevent the engine from starting by accident.

NOTE: Torque is measured in foot pounds (metric Nm). This measurement describes how tight a nut or bolt must be. The torque is measured with a torque wrench.

HOW TO

CHECK THE MUFFLER

Check the muffler every 50 hours. Make sure the muffler is correctly mounted and is not loose. If the muffler is worn or burnt, replace with a new muffler. A worn muffler is a fire hazard and can also damage the engine.

If you mount a spark arrester to the muffler, also check the spark arrester when you check the muffler. If the spark arrester is worn or damaged, replace it with a new spark arrester. See your nearest authorized service center for a spark arrester.

F-040740L

21

Page 20 Page 22
Page 21
Image 21
Murray 425620x92B manual Frequency Maintenance Required Comments, General Recommendations, HOW to Check the Muffler
Page 20 Page 22

425620x92B specifications

Murray 425620x92B is a notable power tool that has gained attention for its user-friendly design and efficient performance. This model is primarily designed for carpentry and woodworking enthusiasts, making it an excellent choice for both professionals and hobbyists.

One of the main features of the Murray 425620x92B is its robust motor. With a power rating that allows it to handle demanding tasks, this tool provides reliable performance whether you’re cutting, shaping, or smoothing wood. The motor is engineered for longevity, ensuring that users can depend on it for various projects without frequent breakdowns.

The design of the Murray 425620x92B enhances its usability. It includes an ergonomic handle that provides a comfortable grip, reducing fatigue during extended use. This is particularly important for users who engage in long hours of work, as comfort can significantly impact efficiency and precision.

In terms of technology, the Murray 425620x92B incorporates advanced safety features. It is equipped with an automatic shut-off function, which activates when the tool overheats. This precautionary measure ensures that users can operate the tool safely, minimizing the risk of accidents. Furthermore, its safety switch prevents accidental start-ups, providing an extra layer of security.

The precision of the Murray 425620x92B is another standout characteristic. With adjustable settings, users can easily modify the depth and speed of cuts according to their needs. This versatility allows for a wide range of applications, from delicate trimming to more aggressive cutting tasks. Additionally, the tool features a dust collection system that helps maintain a clean work environment, reducing cleanup time and enhancing visibility during operation.

Durability is also a hallmark of the Murray 425620x92B. Constructed with high-quality materials, this tool can withstand the rigors of continuous use in various work conditions. Its design includes protective casing that shields internal components from dust and debris, further extending its lifespan.

In conclusion, the Murray 425620x92B is a powerful, versatile, and safe tool ideal for woodworking tasks. Its combination of performance, comfort, safety features, and durability makes it a top choice for those looking to invest in a reliable power tool. Whether you’re a seasoned professional or just starting in the woodworking world, the Murray 425620x92B promises to meet and exceed your expectations.
Top Page Image Contents