MAINTENANCE
HOW TO REPLACE THE PRIMARY
MOWER DRIVE BELT
1.Remove the mower housing. See the instructions on “How To Remove The Mower Housing”.
2.Remove the three screws from the left pulley cover. Remove the pulley cover.
3.To remove the primary mower drive belt from the left man- drel pulley, slide the primary mower drive belt between the left mandrel pulley and the belt guides.
4.Pull the belt retainer away from the idler pulley. Remove the primary mower drive belt from the idler pulley.
5.Move the brake pad assembly away from the stack pulley. Remove the primary mower drive belt from the stack pulley.
NOTE: Replace the primary mower drive belt with an original equipment belt. See an authorized service center in your area.
6.Install a new primary mower drive belt. Pull the brake pad as- sembly away from the stack pulley. Put the belt around the stack pulley. Make sure the primary mower drive belt is in- side of the belt guide.
7.Pull the belt retainer away from the idler pulley. Put the flat side of the primary mower drive belt around the idler pulley.
8.Make sure the “V” side of the primary mower drive belt is against the mandrel pulleys as shown.
9.Make sure the primary mower drive belt is inside all the belt guides.
10.Assemble the left pulley cover.
11.Install the mower housing. See the instructions on “How To In- stall The Mower Housing”.
12.Before you mow, check the blade rotation control. See the in- structions on “How To Adjust The Blade Rotation Control”.
HOW TO REPLACE THE SECONDARY MOWER DRIVE BELT
1.Remove the mower housing. See the instructions on “How To Remove The Mower Housing”.
2.Remove the primary mower drive belt from the stack pulley.
3.Remove the two screws from the right pulley cover. Remove the right pulley cover.
4.Pull the idler pulley away from the secondary mower drive belt. Remove the belt from the idler pulley.
5.Remove the secondary mower drive belt from the right man- drel pulley.
6.Remove the secondary mower drive belt from the stack pulley.
NOTE: Replace the secondary mower drive belt with an original equipment belt. See an authorized service center in your area.
7.Install a new secondary mower drive belt. Put the belt around the bottom of the stack pulley. Make sure the secondary mower drive belt is inside the belt guide next to the stack pulley.
8.Put the secondary mower drive belt around the right drive pulley.
9.Pull the idler pulley toward the front. Install the flat side of the secondary mower drive belt against the idler pulley.
10.Make sure the “V” side of the secondary mower drive belt is around the right mandrel pulley.
11.Assemble the right pulley cover.
12.Put the primary mower drive belt around the stack pulley.
13.Install the mower housing. See the instructions on “How To In- stall The Mower Housing”.
14.Before you mow, check the blade rotation control. See the in- structions on “How To Adjust The Blade Rotation Control”.
|
| Left |
| Screw | Pulley Cover |
Screw |
|
|
| Idler Pulley | Belt |
|
| |
Right Pulley Cover |
| Retainer |
| Stack Pulley | Left |
|
| Mandrel Pulley |
Brake Pad | Belt Guide |
|
Assembly | Belt Guide | |
|
| |
Secondary |
|
|
Mower Drive Belt |
|
|
Right |
|
|
Mandrel |
|
|
Pulley |
|
|
|
| Brake Pad Assembly |
|
| Primary Mower Drive Belt |
Idler Pulley |
| Figure 36 |
|
| |
32 |
|
