OPERATION
TAPE
To use the TAPE input, connect external source to the TAPE input (see page 7). Select TAPE input by pressing the TAPE button so TAPE LED is lit. Selecting the TAPE input can also be achieved by pressing the corresponding button on the remote handset (see page 8).
TAPE MONITOR
To record to tape, (or alternatively CD recorder, DAT, minidisk or computer soundcard analogue input) connect the tape out to the tape recorder line in. Press the input selector button on the front panel or remote control. This source will now be routed to the M6i TAPE OUT for recording by tape deck.
The recording can be directly monitored through the loudspeakers by pressing the TAPE MONITOR button so the TAPE MONITOR LED is lit. Press again to return back to the original input being listened to (and TAPE MONITOR LED is out again).
On some 3 head tape decks there is an additional tape/source switch which should be in the 'TAPE' position for this to work. If in doubt, please consult tape deck operating manual.
Note – adjustment of the volume control has no effect on the recording level.
Issue 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Page 10 of 14 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
