Manuals / Musical Fidelity / Home Audio / Stereo Amplifier

Musical Fidelity X-80 specifications Connections, General Advice

Models: X-80

1 4
Download 4 pages 10.47 Kb
Page 3
Image 3

All input, output and power connections should be made with the mains power switched OFF.

INPUT CONNECTIONS

The X-80 has four pairs of “line level” inputs controlled by the internal volume setting. They all have the same input sensitivity, and are therefore suitable for use with any source component having an output of at least 300mV. The four left and right socket pairs on the rear panel are marked INPUT 1, 2, 3 and 4, corre- sponding with the blue function indicator LEDs on the front panel.

Connect the left and right outputs from your audio components to each of the four sets of RCA sockets to suit your own order of preference.

Connect the X-80’s TAPE RECord out- put sockets to the line input sockets of the your tape deck.

CONNECTIONS

OUTPUT CONNECTIONS

Connect your loudspeakers to the pairs of terminals on the back panel marked as LEFT and RIGHT SPEAKER outputs.

Note: the combined load impedance must not be less than 4 ohms.

PRE-AMPLIFIER OUTPUT

The X-80 amplifier has its pre-amplifier output available from RCA sockets on the back panel marked PRE-OUT, and is controlled by the volume adjustment.

This is to allow “bi-amplification” using suitable external amplifiers and crossover networks to power the speaker drive components separately, giving noticeable improvement in clarity, imaging and bass weight.

In this arrangement, typically the X-80’s speaker outputs are used to drive the speaker’s “tweeter” (high audio frequen- cies), and an external stereo amplifier drives the “woofer” (low frequencies). The X-80’s PRE OUT RCA sockets would therefore be connected to the input of the external “woofer” amplifier in this example.

If you are in doubt about bi-amplifica- tion, please contact your dealer for advice.

GENERAL ADVICE

INSTALLATION PRECAUTIONS and USER INFORMATION

Your new X-80 Integrated amplifier is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions:

Heed all warnings shown on the back of the product.

Only connect the X-80 Integrated amplifier to a mains outlet having the same voltage as marked at the back of the unit.

Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.

Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items placed on them.

Do not use near water, or place water-filled containers on the amplifier, for example, flower vases or potted plants. If water does spill inside, immediately pull out the mains plug from the wall socket and inform your dealer, who should then check the unit before further use.

Entry of liquid into the amplifier is dangerous, and may cause electric shock or fire hazard.

Do not place the unit near heat sources such as radiators, direct sunlight or other equipment. The case of this amplifier can run at high temperatures - operate the unit in a well ventilated area, and do not touch the cabinet sides or top after periods of use at high output power.

Do not remove covers or try to gain access to the inside. There are no internal user adjustments. Refer all service work to an authorised Musical Fidelity agent.

NOTE: Unauthorised opening of the equipment will invalidate any warranty claims.

There are fuses inside the X-80 amplifier. In the unlikely event that one blows, refer the unit to your audio dealer. Do NOT try to replace the fuses yourself as this will invalidate the warranty.

Dust regularly with a soft cloth or soft brush, but be careful when using cleaning or polishing agents - they may harm the surface finish.

The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by lightning. For protection of your audio system during electrical storms, remove the mains plugs and disconnect any aerial lead.

If after-sales service is required, to help your dealer identify the X-80 Integrated amplifier please quote the serial number located on the rear panel of the unit.

RADIO FREQUENCY INTERFERENCE (R.F.I)

This product has been tested to ensure that its operation is not adversely affected by normal background levels of R.F.I., and that it does not itself generate excessive amounts of interference. However, if a problem persists, please contact your Musical Fidelity agent.

X-80 Integrated Amplifier

Page 6 of 8

Issue 4 May 2004

X-80 Integrated Amplifier

Page 3 of 8

Page 2 Page 4
Page 3
Image 3
Musical Fidelity X-80 specifications Connections, General Advice
Page 2 Page 4

X-80 specifications

The Musical Fidelity X-80 is a notable addition to the world of high-fidelity audio equipment, particularly appealing to audiophiles seeking a robust and versatile integrated amplifier. This device is celebrated for its remarkable sound quality, solid build, and a suite of features designed for both convenience and performance.

One of the hallmark features of the X-80 is its power output. Capable of delivering a staggering 80 watts per channel into 8 ohms, it provides a dynamic and engaging sound experience, suitable for a variety of speaker types. This power is ample enough to drive even demanding speakers, ensuring listeners enjoy a rich and full-range sound without distortion at higher volumes.

The design of the X-80 incorporates advanced technologies that enhance audio reproduction. The amplifier employs a class AB output stage, which combines the efficiency of class B with the linearity of class A. This results in a warm and natural sound signature while maintaining the ability to handle complex musical passages with ease.

Another significant aspect of the X-80 is its connectivity options. The amplifier comes equipped with multiple analog inputs, including line-level connections, allowing users to connect a variety of sources, from CD players to turntables. Additionally, the X-80 features a high-quality phono stage, which is especially beneficial for vinyl enthusiasts looking to enjoy their records with clarity and detail.

The build quality of the X-80 is typically musical fidelity, showcasing a rigid chassis that minimizes vibrations and a sleek, minimalist aesthetic. The front panel features a user-friendly interface, with clearly labeled knobs and buttons for easy adjustment of volume, source selection, and tone control.

Moreover, the X-80 includes a range of output options to connect to external equipment, enabling it to serve as a central hub in a more extensive audio setup. The amplifier is compatible with various speaker configurations, including bi-wiring options, which further enhances its versatility.

In summary, the Musical Fidelity X-80 stands out in the integrated amplifier market due to its powerful output, refined sound quality, and thoughtful technological integrations. With its excellent build, extensive connectivity, and user-friendly design, it is an appealing choice for anyone looking to elevate their audio experience. Whether listening to classical masterpieces or the latest pop hits, the X-80 delivers a listening experience that captures the essence of the music.