X-PSUV8 INSTALLATION
Issue 1 Page 6 of 10
INTRODUCTION
Congratulations on the purchase of your new X-PSUV8
power supply unit.
The X-PSUV8 complements our compact integrated Hi-
Fi range, powering a set of our mini-separates from one
convenient box.
The unit will control power to all units connected to it
through one on/off switch, and only needs one wall
socket for up to four components.
INSTALLATION
Position the X-PSUV8 on a stable, horizontal surface
where there is no risk of it being knocked, or subjected
to vibration such as from loudspeakers.
CONNECTIONS
Outputs: With the unit switched off, connect your
components to the DIN sockets, on the back panel.
Once all components are connected to the power supply
unit, wire them as required with interconnect cables, and
check wiring.
Connect the unit to the mains using supplied lead.
Switching on the power supply unit should light the
front panel power LED and the connected components
should all come on. The setup is then ready for use.
CLEANING
Before cleaning the unit, switch off power at the mains
switch and remove the mains plug from the wall socket.
Clean the cabinet and remote control unit using a moist
cloth. We do not advise using solvents, white spirit or
thinners as they could damage the surface finish.