CARE AND MAINTENANCE INSTRUCTIONS

Federal Regulations require Coast Guard approved personal flotation devices (PFDs) that are legibly marked with the Coast Guard approval number, are in good and serviceable condition, and are the correct size for each person on board. It is the responsibility of the operator to be sure this PFD is in serviceable condition. To be considered serviceable, this PFD shall not exhibit deterioration that could diminish its performance, such as broken or deformed hardware, detached webbing, rotted structural components, air leaks or nonfunctional inflators. Unless worn inflated, this PFD must also be properly armed with a cylinder installed in the inflator, and single point status indicator showing green. See Page 3 for instructions. Failure to follow these instructions rigorously could result in a non-functioning PFD causing injury or death.

Check the following at the intervals listed below.

1)Before Each Use:

i)Examine the single point status indicator through the window panel, ensuring it is green. If the indicator is red, the mechanism requires service. See Re-arming Your PFD, p. 8.

ii)Ensure the manual pull-tab is accessible.

iii)Visually examine your Inflatable PFD for damage or excessive abrasion, wear, tear or contamination. Particular attention must be paid to the stitching, straps and hardware. If in doubt, send it to your Mustang dealer for evaluation and/or servicing.

2)Every Two (2) Months:

i)Leak Test: The Inflatable PFD should be tested for general leakage by orally inflating your Inflatable PFD until firm and let stand 16 hours. A leaking Inflatable PFD will not hold its firmness and should be replaced. If your Inflatable PFD leaks, take it to your Mustang dealer for evaluation and/or servicing. Repack the Inflatable PFD as outlined in the Repacking section (p. 11).

ii)Oral Inflation Valve Test: To check the oral inflation valve, fully inflate the Inflatable PFD using the oral inflator and hold valve under water. If bubbles appear, deflate and re-inflate to test again. Should the leak persist, take your Inflatable PFD to your Mustang dealer for evaluation and/or servicing.

Inflatable PFD Owner’s Manual

15

Page 16 Page 18
Page 17
Image 17
Mustang Survival MD3183, MD3184 manual Care and Maintenance Instructions, Check the following at the intervals listed below
Page 16 Page 18

MD3183, MD3184 specifications

Mustang Survival has long been an industry leader in personal flotation devices and water sports gear, and their MD3184 and MD3183 models epitomize their commitment to innovation and safety. Designed specifically for commercial applications, these life jackets are ideal for marine professionals, rescuers, and avid water sports enthusiasts who require robust performance and reliability.

The Mustang Survival MD3184 and MD3183 are built with advanced materials that prioritize durability and comfort. The outer shell is made from high-quality, abrasion-resistant fabric, ensuring that the jackets can withstand the rigors of marine environments while keeping wearers protected. The interior utilizes a soft, high-visibility foam that offers not only superior buoyancy but also increased comfort for prolonged use.

One of the standout features of the MD3184 and MD3183 is their design focused on mobility. These jackets boast a low-profile design that allows for ease of movement, ensuring that users can perform necessary tasks without restrictions. The strategically placed adjustments and side panels contribute to a snug fit, which is essential when working in dynamic situations on the water.

Safety is paramount in the design of these jackets. They include reflective piping and accents that enhance visibility in low light conditions, making it easier for rescue teams to locate individuals in distress. Additionally, both models are equipped with a built-in whistle and access points for harness attachment, enhancing their functionality in emergency scenarios.

The MD3184 and MD3183 also integrate Mustang Survival's proprietary Flotation Technology, which provides excellent buoyancy when needed most. The jackets are designed to turn unconscious wearers face-up, greatly increasing chances of survival until help arrives. It's this focus on advanced safety features that has made Mustang Survival a trusted name in the industry.

Furthermore, both the MD3184 and MD3183 models are available in various sizes to accommodate a wide range of users, promoting inclusivity in personal flotation devices. They also meet or exceed numerous safety standards, ensuring compliance with regulations and providing peace of mind for users.

In conclusion, the Mustang Survival MD3184 and MD3183 life jackets are excellent choices for anyone in need of reliable and high-performing flotation devices. Combining advanced safety features, comfort, and a focus on mobility, these models are set to deliver exceptional performance in various marine environments. Whether for work or leisure, Mustang Survival reaffirms its dedication to keeping individuals safe on the water.
Top Page Image Contents