|
|
|
Phono input |
|
|
Input impedance (R and C) |
| 47kΩ / 200pF |
Input sensitivity, 1kHz | MM | 2.5mV ref. 0.5V |
Signal/Noise ratio | MM | 77dB ref. 5mV |
THD (20Hz - 20kHz) |
| <0.1% |
RIAA response accuracy (20Hz - 20kHz) |
| ±0.5dB |
|
|
|
Line level inputs |
|
|
Input impedance (R and C) |
| 20kΩ / 500pF |
Input sensitivity (ref. 1W) |
| 165mV |
Maximum input signal |
| >10V |
Signal/Noise ratio |
| 91dB |
Frequency response (20Hz - 20kHz) |
| ±0.5dB |
|
|
|
Line level outputs |
|
|
Output impedance | 220Ω | |
| Tape | Source Z + 2kΩ |
| Phones | 220Ω |
Maximum output level | >12V | |
| Tape | >10V |
| Phones | >10V into 600Ω |
|
| >500mV into 8Ω |
|
|
|
Tone controls |
|
|
Treble |
| ±7dB at 10kHz |
Bass |
| ±10dB at 50Hz |
|
|
|
POWER AMP SECTION |
|
|
Continuous output power into 8Ω * |
| 35W (17dBW) |
Rated distortion (THD 20Hz - 20kHz) |
| 0.03% |
Clipping power (maximum continuous power per channel) |
| 42W |
IHF Dynamic headroom at 8Ω |
| +5.5dB |
IHF dynamic power (maximum short term power per channel) | 8Ω | 120W (21dBW) |
| 4Ω | 160W (23dBW) |
| 2Ω | 200W (23dBW) |
Damping factor (ref. 8Ω , 50Hz) |
| >100 |
Input impedance |
| 18kΩ / 560pF |
Input sensitivity (for rated power into 8Ω ) |
| 1V |
Frequency response (20Hz - 20kHz) |
| +0.3dB |
Signal/noise ratio | ref. 1W | 102dB |
| ref. rated power | 117dB |
THD (20Hz - 20kHz) |
| <0.03% |
|
|
|
Remote |
| No |
NAD Link |
| No |
|
|
|
PHYSICAL SPECIFICATIONS |
|
|
Dimensions (W x H x D) |
| 420 x 108 x 320mm |
Net weight |
| 6.4kg |
Shipping weight |
| 7.8kg |
*Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion. Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE