NAD 3240PE Pre-Ampsection, Phono input, Line level inputs, Line level outputs, Tone controls

PRE-AMP SECTION
Phono input
Input impedance (R and C)		47kΩ / 100pF
Input sensitivity, (1kHz, ref. rated power)		3.2mV
Signal/Noise ratio (A-weighted with cartridge connected)		76dB ref. 5mV
THD (20Hz - 20kHz)		<0.04%
RIAA response accuracy (20Hz - 20kHz)		±0.5dB
Line level inputs
Input impedance (R and C)		15kΩ / 100pF
Input sensitivity (ref. rated power)		160mV
Maximum input signal		>10V
Signal/Noise ratio (A-weighted ref 1W)		88dB
Frequency response (20Hz - 20kHz)		±0.5dB
Infrasonic filter		-3db at 15Hz, 24dB/octave
THD		0.01%
Line level outputs
Output impedance	Pre-amp	600Ω
	Tape	Source Z + 1kΩ
	Phones	220Ω
Maximum output level		12V
	Tape	8V
	Phones	>10V into 600Ω
		>500mV into 8Ω
Tone controls
Treble		±7dB at 10kHz
Bass		±10dB at 50Hz
Bass EQ		+3dB at 70Hz
		+6dB at 40Hz
POWER AMP SECTION
Continuous output power into 8Ω *		40W (16dBW)
Rated distortion (THD 20Hz - 20kHz)		0.03%
Clipping power (maximum continuous power per channel)		50W
IHF Dynamic headroom at 8Ω		+6dB
IHF dynamic power (maximum short term power per channel)	8Ω	160W (22dBW)
	4Ω	200W (23dBW)
	2Ω	250W (24dBW)
Damping factor (ref. 8Ω , 50Hz)		>50
Input impedance		22kΩ / 880pF
Input sensitivity (for rated power into 8Ω )		1V
Frequency response		6Hz - 50kHz +0, -3dB
Signal/noise ratio	ref. 1W	100dB
	ref. rated power	116dB
THD (20Hz - 20kHz)		<0.03%
Remote		No
NAD Link		No
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D)		420 x 108 x 380mm
Net weight		6.7kg
Shipping weight		8.0kg
Power consumption (120 ~ 240V, 50/60Hz)		230VA

*Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion. Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.

Dimension depth excludes terminals, sockets, controls and buttons.

© NAD Electronics. All rights reserved. E & OE