NAD 3400 Pre-Ampsection, Phono input, Line level inputs, Line level outputs, Tone controls

PRE-AMP SECTION
Phono input
Input impedance (R and C)	MM	47kΩ / 100/200/300pF
	MC	100Ω / 1000pF
Input sensitivity, 1kHz	MM	2.2mV ref. 0.5V
	MC	0.11mV
Signal/Noise ratio (A-weighted with cartridge connected)	MM	80dB ref. 5mV
	MC	78dB ref. 0.5mV
THD (20Hz - 20kHz)		<0.02%
RIAA response accuracy (20Hz - 20kHz)		±0.3dB
Line level inputs
Input impedance (R and C)		50kΩ / 250pF
Input sensitivity (ref. 1W)		15mV
Maximum input signal		10V
Signal/Noise ratio (A-weighted ref 1W)		96dB
Frequency response		20Hz - 20kHz / ±0.3dB
Line level outputs
Output impedance	Pre-amp	600Ω
	Tape	Source Z + 1kΩ
Maximum output level	Pre-amp	10V
Tone controls
Treble		±12dB at 3, 6 or 12kHz
Bass		±12dB at 50, 100 or 250Hz
Bass EQ		+3dB at 60Hz
		+6dB at 36Hz
Infrasonic filter (switchable)		-3dB at 12Hz - 12dB/octave
POWER AMP SECTION
Continuous output power into 8Ω *		100W (20dBW)
Rated distortion (THD 20Hz - 20kHz)		0.03%
Clipping power (maximum continuous power per channel)		130W
IHF Dynamic headroom at 8Ω		+5.7dB
IHF dynamic power (maximum short term power per channel)	8Ω	370W (25.7dBW)
	4Ω	400W (26dBW)
	2Ω	440W (26.4dBW)
Damping factor (ref. 8Ω , 50Hz)		>100
Input impedance		20kΩ / 600pF
Input sensitivity (for rated power into 8Ω )		1V
Frequency response		3Hz - 100kHz / +0, -3dB
Signal/noise ratio	ref. 1W	98dB
	ref. rated power	118dB
THD (20Hz - 20kHz)		<0.03%
Remote		Yes
NAD Link		Yes
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D)		435 x 120 x 385mm
Net weight		11kg
Shipping weight		12.6kg
Power consumption (120 ~ 240V, 50/60Hz)		390VA

*Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion. Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.

Dimension depth excludes terminals, sockets, controls and buttons.

© NAD Electronics. All rights reserved. E & OE