NAD S 570 owner manual Connecting to AN Analogue Stereo System, To Enjoy Good Quality Sound

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Setup

CONNECTING TO AN ANALOGUE STEREO SYSTEM

Good quality sound of 2-Channel Stereo system can be achieved by connecting this DVD player to a receiver equipped with a two analogue audio inputs (right and left) and speaker system (right and left front speakers).

S-VIDEO / Component / Composite

From S-VIDEO / Component Video /75–Ohm coaxial or SCART cable

Composite or SCART

	To S-VIDEO / Component /
From the MIXED AUDIO OUT	Composite or SCART
(L & R) Jacks	inputs of the TV.

Audio cable

TV or monitor with audio/visual inputs

To the analogue input (L & R) amplifier equipped with analogue inputs.

Audio system

TO ENJOY GOOD QUALITY SOUND

You need to select from the OSD drop down menu, Audio, Analogue On, and 48K.

NOTES

•Switch the power off on the S570 before switching the SCART/S-VIDEO switch position.

•Refer to the owner’s manual of your receiver as well.

•Before you connect the S570 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•Depending on your Digital sound decoder, the decode rate may be 96 or 48K.

•The output sound of the S570 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

•Turn off the receiver before you connect or disconnect the S570’s power cord. If you leave the receiver power on, the speakers may be damaged.

22