NAD T524 Lock Parental Control, Rating DVD-V, Password Security Code, Country Code DVD-V

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Installation and Setup

BEFORE OPERATION

LOCK (PARENTAL CONTROL)

LOCK

RatingUnlock

PasswordNew

Country Code UK

Move Select

RATING DVD-V

Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative.

The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable.

1Select “Rating” on the LOCK menu then press .

2To access the Rating, Password and Country Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so.

Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR.

3Select a rating from 1 to 8 using the buttons.

Rating 1-8

Rating one (1) has the most restrictions and rating eight (8) is the least restrictive

Unlock

If you select unlock, parental control is not active and the disc plays in full.

NOTE

If you set a rating for the player, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have a lower rating. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.

4Press ENTER to confirm your rating selection, then press SETUP to exit the menu.

PASSWORD (SECURITY CODE)

You can enter or change password.

1Select Password on the LOCK menu then press .

2Follow step 2 as shown left (Rating). “Change” or “New” is highlighted.

3Enter the new 4-digit code, then press ENTER. Input it again to verify.

4Press SETUP to exit the menu.

If you forget your Security Code

If you forget your security code you can clear it using the following steps:

1Press SETUP to display the Setup menu.

2Input the 6-digit number “210499” and the security code is cleared.

3Enter a new code as described above.

COUNTRY CODE DVD-V

Enter the code of the country/area whose standards were used to rate the DVD video disc, based on the list in the reference chapter.

1Select “Country Code” on the LOCK menu then press .

2Follow step 2 as shown in the left column (Rating).

3Select the first character using buttons.

4Press ENTER and select the second character using buttons.

5Press ENTER to confirm your country code selection.

16