Nady Systems 3WA-1700 owner manual S P E A K E R C O N N E C T I O N S, Mains & Monitor Mode

Models: 3WA-1700

1 11

Page 8

S P E A K E R C O N N E C T I O N S

1.Input main Left and Right signals from your crossover into Channels 1 and 2.

2.Input Monitor or Aux full-range signal from your mixer into the Subwoofer input.

3.Set the Filter/Source switch to OFF.

4Ω min

AUX SEND/

MONITOR

4Ω min

8Ω 8Ω

MONITORS

SOUND REINFORCEMENT

8Ω 8Ω

(Note: Do not connect a speaker load less than 4Ω to either channel as it can damage your amplifier.)

Image 8

Contents

3-CHANNELPROFESSIONAL POWER AMPLIFIER 3WA-1700F E AT U R E S C O N T E N T S3-CHANNELPROFESSIONAL POWER AMPLIFIER 3WA-1700WA R N I N G IMPORTANT SAFETY INSTRUCTIONSC O N T R O L S A N D C O N N E C T I O N S FRONT PANEL1. POWER SWITCH 2. POWER LED INDICATORBACK PANEL 10. FILTER / SOURCE SWITCH11. LOW CUT FILTER SWITCH 12. OUTPUT CONNECTORSI N S TA L L AT I O N I N P U T C O N N E C T I O N SCONTENTS INSPECTIONMains & Subwoofer Mode with external crossover S P E A K E R C O N N E C T I O N SMains & Subwoofer Mode with internal low-pass S P E A K E R C O N N E C T I O N S Mains & Monitor ModeS P E C I F I C AT I O N S 1. OUTPUT SECTION2. INPUT SECTION 3. GENERALN OT E S SERVICE FOR YOUR NADY AUDIO PRODUCT