Nady Systems DM 80, DM 70 manual Features, Specifications, Typical Frequency Response, Service

FEATURES

•Cardioid pattern allows close miking without bleed-through from other drum kit pieces

•Neodymium element delivers maximum output

•Up to 140dB SPL handling capacity for distortion- free reproduction of even the loudest drums and other instruments

•Transformerless moving-coil dynamic design for enhanced bass and fast transient response

•All metal construction for maximum reliability

•Special rubber shockmount mic holder minimizes floor vibration pick-up

•Incredibly small, low-profile design for minimum visibility and versatile close-miking placement around the drum kit

•Gold-plated XLR for maximum conductivity

•Full frequency response for sonic punch with exceptional clarity

SPECIFICATIONS

Cartridge Type, Magnet:	Dynamic, neodymium cartridge
Directional Pattern:	Unidirectional Cardioid
Frequency Response:	DM 70: 70~16,000 Hz
	DM 80: 30~15,000 Hz
Sensitivity (@ 1KHz, 74dB SPL):	DM 70: -73dB, +/- 3dB
	DM 80: -72dB, +/- 3dB
Impedance:	DM 70: 600 Ohm, DM 80: 250 Ohm
Maximum SPL (@1% THD):	DM 70: >130dB, DM 80: >140dB
Dimensions:	DM 70: 1.65" X 4.5" (42 X 115mm)
	DM 80: 2.1" X 4.7" (54 X 120mm)
Weight:	DM 70: 8.5oz (237g), DM 80: 10.6oz (295g)
Material:	Handle: die-cast zinc
	Holder Mount: rubber, plastic and with brass insert
	Ballscreen: steel mesh
	Gold-plated XLR contacts

TYPICAL FREQUENCY RESPONSE

WIRING DIAGRAM - recommended cable wiring

SERVICE

(U.S.) Should your Nady microphone require service, please contact the Nady Service Department via telephone at (510) 652-2411 or E–mail at service@nadywireless.com

(INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product.