S P E C I F I C A
T
I
O
N
S
TECHNICAL
DATA
Frequency Response Analysis
Back Panel
(2) | (4) | (5) | (6) | (7) | (8) |
(1)
(3) |
(14) |
(9)
(10)
(11)
(12)
(13) |
(1)XLR BALANCED INPUT
(2)1/4" (6.3mm)BALANCED/UNBALANCED INPUT Tip = hot, Ring = cold, Sleeve = ground.
(3)MIC/LINE INPUT PAD
This button sets the gain range of the GAIN control.
For microphone applications, where more level is needed, push the button in.
(4)GAIN CONTROL
This controls the input level.
(5)HIGH EQ
(6)MIDRANGE EQ
(7)LOW EQ
(8)LEVEL CONTROL
Overall output level of the
(9)HIGH FREQUENCY SIGNAL LED
(10)LOW FREQUENCY SIGNAL LED
(11)ON/OFF INDICATOR
(12)POWER ON/OFF SWITCH
(13)AC SELECTOR SWITCH
Before plugging in the power cord, check to see that this switch is set to the proper voltage for your area:
~115V (60Hz) or ~230V (50Hz).
(14)AC POWER CORD IEC CONNECTOR w/ INTERNAL FUSE HOLDER
Connects to the AC power cable.
Fuse: 115VAC ~ 5A 250V 20mm glass tube 230VAC ~ 3A 250V 20mm glass tube
S E 
R
V
I
C
E
FOR YOUR NADY AUDIO PRODUCT
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510)
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
