S P E C I F I C AT I O N S
POWER SPECIFICATIONS
EIA Output Power RMS | 8Ω | 70W + 70W |
1kHz, THD maximum 1% | 4Ω | 130W + 130W |
| 8Ω Bridged | 220W |
Less than 8Ω Bridged or 4Ω Per Side is not recommended.
ELECTRICAL SPECIFICATIONS
INPUT SENSITIVITY | 0.77V/26dB/1.4V |
INPUT IMPEDANCE | 20KΩ Unbalanced & Balanced |
FREQUENCY RESPONSE | 10Hz~50KHz |
MAXIMUM INPUT LEVEL | 21dB/6V |
DAMPING FACTOR (f=1KHz 8Ω) | >150 |
SLEW RATE | 35V/uS |
DISTORTION | <0.04% |
S/N RATIO | >80dB |
POWER SUPPLY | Voltage selectable |
FUSES | Standard IEC receptacle with |
| 115VAC ~ 5A/250V |
| 230VAC ~ 3A/250V |
GENERAL SPECIFICATIONS
PROTECTION | Full short circuit, current limited, DC fault, AC line fuse, thermal, Power on/off transients, |
FRONT PANEL | Power switch, Channel 1 and Channel 2 Level controls |
REAR PANEL | Stereo/Bridge/Parallel selector, Input Level selector, |
LED INDICATORS | Channel 1 and Channel 2 Clipping, Protect, Bridge, Parallel, Power |
POWER | IEC power cord jack |
INPUTS | Active balanced XLR and 1/4" (6.3mm) TRS |
OUTPUTS | Binding posts/Banana jack, Speakon |
DIMENSIONS (WXDXH) | 19" x 9.84" x 1.73" (483 x 250 x 44mm) |
WEIGHT | 18.25lbs. (8.28Kg) |
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design
and appearance, are subject to change without prior notice.
7
