Nady Systems TMP-1 MICPREAMP owner manual Rear Panel, Controls And Connectors

CONTROLS AND CONNECTORS

REAR PANEL

(10) (11) (12) (13)

Rear Panel

(10)AC POWER CORD IEC CONNECTOR WITH INTEGRATED FUSE HOLDER

This standard IEC power cord receptacle is used to connect the AC power to your unit. It features a built-in fuse holder for a 5X20mm, 0.5A/250V slow-blow fuse. If the fuse continuously blows, shut off the unit and have it serviced by qualified service personnel.

(11) AC VOLTAGE SELECT SWITCH

Before plugging in the power cord, check to see that the unit is set for the proper voltage for your area: ~115V (60Hz) or ~230V (50Hz).

(Note: Use at the improper voltage can damage your unit and void the warranty.)

(12) OUTPUTS

Unbalanced 1/4" (6.3mm) and balanced XLR outputs

(Note: Only one output (1/4" or XLR) can be used at one time. Do not connect to both at the same time, or the signal will be severely distorted.)

(13) INPUTS

Unbalanced 1/4"(6.3mm) and balanced XLR inputs.

(Note: Only one input per each channel (1/4" or XLR) can be used at one time. Do not connect to both at the same time or the signal will be severely distorted.)

6