SPECIFICATIONS
POWER SPECIFICATIONS
OUTPUT POWER | 120W RMS @ 8Ω per side |
(EIA 1KHz 1% THD) | 150W RMS @ 4Ω per side |
| 300W RMS @ 8Ω bridged |
| Minimum 4Ω per side, 8Ω bridged |
ELECTRICAL SPECIFIACTIONS
INPUT SENSITIVITY | .500V RMS |
INPUT IMPENDANCE | 50KΩ Unbalanced & Balanced |
FREQUENCY RESPONSE (at 10dB below rated output power) | 20Hz~20KHz ±1dB |
| 5Hz~50KHz ±3dB |
DISTORTION | <.1% |
S/N RATIO | 100dB |
GENERAL SPECIFIACTIONS
PROTECTIONS | Full short circuit, open circuit, thermal, ultrasonic, and RF protection; |
| stable into reactive or mismatced loads; ON/OFF muting; current limiter |
FRONT CONTROLS | Power switch, input level control for each channel |
REAR PANEL CONTROLS | Parallel/Mono/Bridge selector, AC voltage selector switch |
CONNECTORS | Power; IEC power cord jack; Input:: Active balanced XLR and 1/4” (6.3mm) TRS |
| Output: |
POWER SUPPLY | Voltage selectable: 110V~120V or 220V~240V AC 50/60 HZ |
FUSE | 115V AC ~ 6A 250V FB; 230V AC ~ 3A 250V FB |
DIMENSIONS | 19” x 12.4” x 3.5” (483 x 315 x 89 mm) |
WEIGHT | 13 lbs. (5.9Kg) |
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and apperance, are subject to change without prior notice.
10