Disarming Your System when Returning

1 Enter your premises through the Entry/Exit door. The keypad will sound a steady tone to remind you to
disarm the system before your Entry Delay time expires.
2 Enter your user code. The Red Armed light will go out, indicating that the system has been disarmed.
Note: If you make a mistake entering your code, press the B key and re-enter the code.

Alarm Indication

If the Red Armed light is flashing rapidly, an alarm occurred while you were away.
Proceed with caution!
For your own protection, leave immediately and call authorities from a neighbor’s phone .

Silencing an Alarm

In the event that the system goes into alarm due to a violated burglary zone, the bell or siren will sound and
the keypad sounder will also activate. To silence the system, enter your User code. The zone light of the
zone which went into alarm continue flashing until B is pressed to reset the alarm memory.
9
SYSTEM
READY
ZONE 3
ZONE 1
ZONE 2
ZONE 4
ARMED
Disarming Your System / Silencing an Alarm
Oi220a.pub
page 9 Thursday, December 18, 1997 18:31