Note
Alternate values cannot be calculated at low frequencies for standards with very high magnetic field limits. A “greater than” symbol (>) is shown under these conditions.
4.Change the units (if needed) by pressing either F1 (kHz), F2 (MHz), or F3 (GHz).
5.Press F4 (SAVE). The probe correction factor will be displayed briefly if you are using a probe in memory and you will automatically return to the measurement screen. See Using Probe Correction Factors on page 24.
6.From the Main Measurement Screen press F1(ALT) to select the Alternate Measurement Display Screen.
To return to the Main Measurements Display Screen...
1.From the Alternate Measurement Display Screen, press F1 (MAIN) to select the Main Measurements Display Screen.
22 | Operating the Meter |